Sort by:
633 products
633 products
Teledyne FLIR NFOV Lens Holder for the FLIR TAU 2 Thermal Cameras
FLIR Tau PCB Wearsaver with Solder Pads
A low-profile adapter that attaches to the Tau's 50-pin Hirose connector, furnishing a solder pad interface. Schematic included.
The Tau2 Wearsaver was designed to be an internal engineering/manufacturing calibration accessory, rather than an OEM interface.
There is a Hirose mating connector on one side of the board, as shown in the picture below:
When the Wearsaver is attached to the Tau2 camera, there are no exposed connectors, just the solder pads for a 20-pin Samtec (and 14 pads for pogo pins).
The pad connections are limited to input power, RS-232, analog video, and LVDS.
The Wearsaver board does NOT provision for External Sync, Discretes, or CMOS signals.
The physical layout is shown in the picture below:
The lens locking ring is designed to mount a Tau WFOV camera into a bulkhead. The M29 x 1.0 thread on the outside of the lens mount flange is placed through the clearance hole in the bulkhead and the O-ring seals the camera to the face.
The Type 2-025 O-ring is not for sale through FLIR. This is a standard O-ring available from many suppliers.
The lock nut tool will attach to a torque wrench for proper tightening of the lens locking ring. Torque the locking ring to 4.0 in-lbs.
Teledyne FLIR Tau WFOV Lens Mount - Locking Ring Install / Removal Tool
Teledyne FLIR Triton FH-313 R, 320 x 256, 25MM 13° FOV - LWIR Multispectral Fixed Camera
$9,449.00
Unit price perTeledyne FLIR Triton FH-313 R, 320 x 256, 25MM 13° FOV - LWIR Multispectral Fixed Camera
$9,449.00
Unit price perTriton FH-Series R
Multispectral Radiometric Fixed Camera
The FLIR Triton FH-Series R are ruggedized, multispectral fixed cameras that integrate industry-leading thermal imaging with 4K visible imaging to provide rapid visual verification of hot spots in early fire detection applications. When a hot spot or temperature change is detected, the contactless temperature measurement is sent to the operator through a connected Video Management System (VMS) for instantaneous assessment and deployment of response tactics.
Custom scheduling provides security personnel the flexibility to enable and disable alarms depending on business hours and seasonality. Combining the power of thermal hot-spot detection with intelligent vehicle detection, false alarms from hot exhaust pipes can be dramatically reduced.
RAPID DETECTION AND VISUAL VERIFICATION
Integrates a high-resolution thermal and visible sensor for hot-spot detection and visual verification from a single device.
- Detect hot spots instantly with up to 320 × 256 thermal resolution and <35 mK sensitivity
- 4K visible camera enables immediate threat verification
- Combines dual-camera capability into one physical connection
- 10-year thermal sensor warranty
INTELLIGENT ALARMS
Detect hot spots and intruders with one camera using advanced onboard analytics.
- Simultaneous detection of thermal threats and intruders
- Vehicle exclusion mode reduces false alarms from hot exhaust
- Flexible scheduling based on time, business hours, and season
- Select between thermal or visible analytics as needed
EASY INTEGRATION
Easily deploy as part of a full FLIR system or integrate with third-party solutions.
- NEXUS® technology enables seamless network connectivity
- Compatible with FLIR United VMS and major third-party VMS
- ONVIF® conformant (Profiles S/G/T)
- Supports radiometric alarms via VMS platforms
Teledyne FLIR Triton FH-324 R, 320 x 256, 13MM 24° FOV - LWIR Multispectral Fixed Camera
$8,649.00
Unit price perTeledyne FLIR Triton FH-324 R, 320 x 256, 13MM 24° FOV - LWIR Multispectral Fixed Camera
$8,649.00
Unit price perTriton FH-Series R
Multispectral Radiometric Fixed Camera
The FLIR Triton FH-Series R are ruggedized, multispectral fixed cameras that integrate industry-leading thermal imaging with 4K visible imaging to provide rapid visual verification of hot spots in early fire detection applications. When a hot spot or temperature change is detected, the contactless temperature measurement is sent to the operator through a connected Video Management System (VMS) for instantaneous assessment and deployment of response tactics.
Custom scheduling provides security personnel the flexibility to enable and disable alarms depending on business hours and seasonality. Combining the power of thermal hot-spot detection with intelligent vehicle detection, false alarms from hot exhaust pipes can be dramatically reduced.
RAPID DETECTION AND VISUAL VERIFICATION
Integrates a high-resolution thermal and visible sensor for hot-spot detection and visual verification from a single device.
- Detect hot spots instantly with up to 320 × 256 thermal resolution and <35 mK sensitivity
- 4K visible camera enables immediate threat verification
- Combines dual-camera capability into one physical connection
- 10-year thermal sensor warranty
INTELLIGENT ALARMS
Detect hot spots and intruders with one camera using advanced onboard analytics.
- Simultaneous detection of thermal threats and intruders
- Vehicle exclusion mode reduces false alarms from hot exhaust
- Flexible scheduling based on time, business hours, and season
- Select between thermal or visible analytics as needed
EASY INTEGRATION
Easily deploy as part of a full FLIR system or integrate with third-party solutions.
- NEXUS® technology enables seamless network connectivity
- Compatible with FLIR United VMS and major third-party VMS
- ONVIF® conformant (Profiles S/G/T)
- Supports radiometric alarms via VMS platforms
Teledyne FLIR Triton FH-369 R, 320 x 256, 9MM 69° FOV - LWIR Multispectral Fixed Camera
$9,099.00
Unit price perTeledyne FLIR Triton FH-369 R, 320 x 256, 9MM 69° FOV - LWIR Multispectral Fixed Camera
$9,099.00
Unit price perTriton FH-Series R
Multispectral Radiometric Fixed Camera
The FLIR Triton FH-Series R are ruggedized, multispectral fixed cameras that integrate industry-leading thermal imaging with 4K visible imaging to provide rapid visual verification of hot spots in early fire detection applications. When a hot spot or temperature change is detected, the contactless temperature measurement is sent to the operator through a connected Video Management System (VMS) for instantaneous assessment and deployment of response tactics.
Custom scheduling provides security personnel the flexibility to enable and disable alarms depending on business hours and seasonality. Combining the power of thermal hot-spot detection with intelligent vehicle detection, false alarms from hot exhaust pipes can be dramatically reduced.
RAPID DETECTION AND VISUAL VERIFICATION
Integrates a high-resolution thermal and visible sensor for hot-spot detection and visual verification from a single device.
- Detect hot spots instantly with up to 320 × 256 thermal resolution and <35 mK sensitivity
- 4K visible camera enables immediate threat verification
- Combines dual-camera capability into one physical connection
- 10-year thermal sensor warranty
INTELLIGENT ALARMS
Detect hot spots and intruders with one camera using advanced onboard analytics.
- Simultaneous detection of thermal threats and intruders
- Vehicle exclusion mode reduces false alarms from hot exhaust
- Flexible scheduling based on time, business hours, and season
- Select between thermal or visible analytics as needed
EASY INTEGRATION
Easily deploy as part of a full FLIR system or integrate with third-party solutions.
- NEXUS® technology enables seamless network connectivity
- Compatible with FLIR United VMS and major third-party VMS
- ONVIF® conformant (Profiles S/G/T)
- Supports radiometric alarms via VMS platforms
Teledyne FLIR Triton FH-608 ID, 640 x 512, 75MM 8.6° FOV - LWIR Multispectral Fixed Camera
$21,690.00
Unit price perTeledyne FLIR Triton FH-608 ID, 640 x 512, 75MM 8.6° FOV - LWIR Multispectral Fixed Camera
$21,690.00
Unit price perTriton FH-Series ID
Multispectral Fixed Camera for Perimeter Protection
The FLIR Triton FH-Series ID are ruggedized, multispectral fixed cameras that integrate industry-leading thermal imaging with 4K visible imaging to provide reliable intruder-detection capabilities for perimeter security.
Built-in convolutional neural network (CNN) analytics accurately detect and classify human and vehicle threats moving at high or low speeds, minimizing false alarms and daily operations costs. Custom scheduling enables operators to run visible analytics during the day and thermal analytics at night for optimized coverage in any lighting condition.
ALWAYS READY, ALWAYS WORKING
Combines thermal and visible imaging into one device for consistent performance across all environments.
- 640 × 512 thermal resolution with <30 mK sensitivity for 24/7 awareness
- 4K visible camera delivers real-time forensic detail
- Dual-sensor system in a single installation
- 10-year thermal sensor warranty
HIGH-ACCURACY INTRUSION DETECTION
Advanced analytics reduce false alarms while accurately detecting human and vehicle threats.
- AI-based classification of humans and vehicles
- Reduced false alarms and operational costs
- Flexible scheduling for day/night analytics modes
- Reliable detection even with partial visibility or varying speeds
EASY INTEGRATION
Integrates seamlessly into FLIR ecosystems or third-party security platforms.
- NEXUS® technology enables network connectivity to FLIR edge devices
- Compatible with FLIR United VMS and major third-party VMS
- ONVIF® conformant (Profiles S/G/T)
Teledyne FLIR Triton FH-610 ID, 640 x 512, 60MM 10° FOV - LWIR Multispectral Fixed Camera
$15,799.00
Unit price perTeledyne FLIR Triton FH-610 ID, 640 x 512, 60MM 10° FOV - LWIR Multispectral Fixed Camera
$15,799.00
Unit price perTriton FH-Series ID
Multispectral Fixed Camera for Perimeter Protection
The FLIR Triton FH-Series ID are ruggedized, multispectral fixed cameras that integrate industry-leading thermal imaging with 4K visible imaging to provide reliable intruder-detection capabilities for perimeter security.
Built-in convolutional neural network (CNN) analytics accurately detect and classify human and vehicle threats moving at high or low speeds, minimizing false alarms and daily operations costs. Custom scheduling enables operators to run visible analytics during the day and thermal analytics at night for optimized coverage in any lighting condition.
ALWAYS READY, ALWAYS WORKING
Combines thermal and visible imaging into one device for consistent performance across all environments.
- 640 × 512 thermal resolution with <30 mK sensitivity for 24/7 awareness
- 4K visible camera delivers real-time forensic detail
- Dual-sensor system in a single installation
- 10-year thermal sensor warranty
HIGH-ACCURACY INTRUSION DETECTION
Advanced analytics reduce false alarms while accurately detecting human and vehicle threats.
- AI-based classification of humans and vehicles
- Reduced false alarms and operational costs
- Flexible scheduling for day/night analytics modes
- Reliable detection even with partial visibility or varying speeds
EASY INTEGRATION
Integrates seamlessly into FLIR ecosystems or third-party security platforms.
- NEXUS® technology enables network connectivity to FLIR edge devices
- Compatible with FLIR United VMS and major third-party VMS
- ONVIF® conformant (Profiles S/G/T)
Teledyne FLIR Triton FH-612 ID, 640 x 512, 50MM 12° FOV - LWIR Multispectral Fixed Camera
$14,849.00
Unit price perTeledyne FLIR Triton FH-612 ID, 640 x 512, 50MM 12° FOV - LWIR Multispectral Fixed Camera
$14,849.00
Unit price perTriton FH-Series ID
Multispectral Fixed Camera for Perimeter Protection
The FLIR Triton FH-Series ID are ruggedized, multispectral fixed cameras that integrate industry-leading thermal imaging with 4K visible imaging to provide reliable intruder-detection capabilities for perimeter security.
Built-in convolutional neural network (CNN) analytics accurately detect and classify human and vehicle threats moving at high or low speeds, minimizing false alarms and daily operations costs. Custom scheduling enables operators to run visible analytics during the day and thermal analytics at night for optimized coverage in any lighting condition.
ALWAYS READY, ALWAYS WORKING
Combines thermal and visible imaging into one device for consistent performance across all environments.
- 640 × 512 thermal resolution with <30 mK sensitivity for 24/7 awareness
- 4K visible camera delivers real-time forensic detail
- Dual-sensor system in a single installation
- 10-year thermal sensor warranty
HIGH-ACCURACY INTRUSION DETECTION
Advanced analytics reduce false alarms while accurately detecting human and vehicle threats.
- AI-based classification of humans and vehicles
- Reduced false alarms and operational costs
- Flexible scheduling for day/night analytics modes
- Reliable detection even with partial visibility or varying speeds
EASY INTEGRATION
Integrates seamlessly into FLIR ecosystems or third-party security platforms.
- NEXUS® technology enables network connectivity to FLIR edge devices
- Compatible with FLIR United VMS and major third-party VMS
- ONVIF® conformant (Profiles S/G/T)
Teledyne FLIR Triton FH-617 ID, 640 x 512, 35MM 17° FOV - LWIR Multispectral Fixed Camera
$11,999.00
Unit price perTeledyne FLIR Triton FH-617 ID, 640 x 512, 35MM 17° FOV - LWIR Multispectral Fixed Camera
$11,999.00
Unit price perTriton FH-Series ID
Multispectral Fixed Camera for Perimeter Protection
The FLIR Triton FH-Series ID are ruggedized, multispectral fixed cameras that integrate industry-leading thermal imaging with 4K visible imaging to provide reliable intruder-detection capabilities for perimeter security.
Built-in convolutional neural network (CNN) analytics accurately detect and classify human and vehicle threats moving at high or low speeds, minimizing false alarms and daily operations costs. Custom scheduling enables operators to run visible analytics during the day and thermal analytics at night for optimized coverage in any lighting condition.
ALWAYS READY, ALWAYS WORKING
Combines thermal and visible imaging into one device for consistent performance across all environments.
- 640 × 512 thermal resolution with <30 mK sensitivity for 24/7 awareness
- 4K visible camera delivers real-time forensic detail
- Dual-sensor system in a single installation
- 10-year thermal sensor warranty
HIGH-ACCURACY INTRUSION DETECTION
Advanced analytics reduce false alarms while accurately detecting human and vehicle threats.
- AI-based classification of humans and vehicles
- Reduced false alarms and operational costs
- Flexible scheduling for day/night analytics modes
- Reliable detection even with partial visibility or varying speeds
EASY INTEGRATION
Integrates seamlessly into FLIR ecosystems or third-party security platforms.
- NEXUS® technology enables network connectivity to FLIR edge devices
- Compatible with FLIR United VMS and major third-party VMS
- ONVIF® conformant (Profiles S/G/T)
Triton FH-Series R PTZ
Multi-Spectral Pan-Tilt-Zoom Camera for Monitoring Surface Temperature Thresholds
The FH-Series R PTZ is a rugged pan-tilt-zoom (PTZ) camera combining thermal radiometry with high-definition visible imaging for fire detection and security applications. This multispectral solution enables rapid visual verification of smoke and hot spots while supporting early fire detection in outdoor environments.
With integrated radiometry and PTZ functionality, the camera provides continuous wide-area coverage and 24/7 monitoring. When a temperature anomaly is detected, measurements are transmitted through a connected Video Management System (VMS) for immediate assessment and response. Flexible scheduling allows operators to tailor alarm activity based on time of day and operational needs.
RAPID DETECTION AND VISUAL VERIFICATION
Combines thermal and visible sensors to detect and verify hot spots from a single device.
- Up to 320 × 256 thermal resolution with <35 mK sensitivity
- High-definition visible imaging for immediate threat verification
- Dual-sensor system in a single installation
- 10-year thermal sensor warranty
INTELLIGENT ALARMS
Advanced analytics enable detection of both thermal events and security threats.
- Detect intrusions and hot spots using onboard analytics
- Reduce false alarms with vehicle exclusion filtering
- Custom scheduling based on time, business hours, and seasonality
- Select thermal or visible analytics modes as needed
EASY INTEGRATION
Easily integrates into FLIR systems or third-party security platforms.
- NEXUS® technology enables seamless device connectivity
- Compatible with FLIR United VMS and third-party VMS platforms
- ONVIF® conformant (Profiles S/G/T)
- Supports radiometric alarm integration
Teledyne FLIR Triton FH-617 R, 640 x 512, 35MM 17° FOV - LWIR Multispectral Fixed Camera
$12,899.00
Unit price perTeledyne FLIR Triton FH-617 R, 640 x 512, 35MM 17° FOV - LWIR Multispectral Fixed Camera
$12,899.00
Unit price perTriton FH-Series R
Multispectral Radiometric Fixed Camera
The FLIR Triton FH-Series R are ruggedized, multispectral fixed cameras that integrate industry-leading thermal imaging with 4K visible imaging to provide rapid visual verification of hot spots in early fire detection applications. When a hot spot or temperature change is detected, the contactless temperature measurement is sent to the operator through a connected Video Management System (VMS) for instantaneous assessment and deployment of response tactics.
Custom scheduling provides security personnel the flexibility to enable and disable alarms depending on business hours and seasonality. Combining the power of thermal hot-spot detection with intelligent vehicle detection, false alarms from hot exhaust pipes can be dramatically reduced.
RAPID DETECTION AND VISUAL VERIFICATION
Integrates a high-resolution thermal and visible sensor for hot-spot detection and visual verification from a single device.
- Detect hot spots instantly with up to 320 × 256 thermal resolution and <35 mK sensitivity
- 4K visible camera enables immediate threat verification
- Combines dual-camera capability into one physical connection
- 10-year thermal sensor warranty
INTELLIGENT ALARMS
Detect hot spots and intruders with one camera using advanced onboard analytics.
- Simultaneous detection of thermal threats and intruders
- Vehicle exclusion mode reduces false alarms from hot exhaust
- Flexible scheduling based on time, business hours, and season
- Select between thermal or visible analytics as needed
EASY INTEGRATION
Easily deploy as part of a full FLIR system or integrate with third-party solutions.
- NEXUS® technology enables seamless network connectivity
- Compatible with FLIR United VMS and major third-party VMS
- ONVIF® conformant (Profiles S/G/T)
- Supports radiometric alarms via VMS platforms
Teledyne FLIR Triton FH-625 ID, 640 x 512, 25MM 25° FOV - LWIR Multispectral Fixed Camera
$10,899.00
Unit price perTeledyne FLIR Triton FH-625 ID, 640 x 512, 25MM 25° FOV - LWIR Multispectral Fixed Camera
$10,899.00
Unit price perTriton FH-Series ID
Multispectral Fixed Camera for Perimeter Protection
The FLIR Triton FH-Series ID are ruggedized, multispectral fixed cameras that integrate industry-leading thermal imaging with 4K visible imaging to provide reliable intruder-detection capabilities for perimeter security.
Built-in convolutional neural network (CNN) analytics accurately detect and classify human and vehicle threats moving at high or low speeds, minimizing false alarms and daily operations costs. Custom scheduling enables operators to run visible analytics during the day and thermal analytics at night for optimized coverage in any lighting condition.
ALWAYS READY, ALWAYS WORKING
Combines thermal and visible imaging into one device for consistent performance across all environments.
- 640 × 512 thermal resolution with <30 mK sensitivity for 24/7 awareness
- 4K visible camera delivers real-time forensic detail
- Dual-sensor system in a single installation
- 10-year thermal sensor warranty
HIGH-ACCURACY INTRUSION DETECTION
Advanced analytics reduce false alarms while accurately detecting human and vehicle threats.
- AI-based classification of humans and vehicles
- Reduced false alarms and operational costs
- Flexible scheduling for day/night analytics modes
- Reliable detection even with partial visibility or varying speeds
EASY INTEGRATION
Integrates seamlessly into FLIR ecosystems or third-party security platforms.
- NEXUS® technology enables network connectivity to FLIR edge devices
- Compatible with FLIR United VMS and major third-party VMS
- ONVIF® conformant (Profiles S/G/T)
Triton FH-Series R PTZ
Multi-Spectral Pan-Tilt-Zoom Camera for Monitoring Surface Temperature Thresholds
The FH-Series R PTZ is a rugged pan-tilt-zoom (PTZ) camera combining thermal radiometry with high-definition visible imaging for fire detection and security applications. This multispectral solution enables rapid visual verification of smoke and hot spots while supporting early fire detection in outdoor environments.
With integrated radiometry and PTZ functionality, the camera provides continuous wide-area coverage and 24/7 monitoring. When a temperature anomaly is detected, measurements are transmitted through a connected Video Management System (VMS) for immediate assessment and response. Flexible scheduling allows operators to tailor alarm activity based on time of day and operational needs.
RAPID DETECTION AND VISUAL VERIFICATION
Combines thermal and visible sensors to detect and verify hot spots from a single device.
- Up to 320 × 256 thermal resolution with <35 mK sensitivity
- High-definition visible imaging for immediate threat verification
- Dual-sensor system in a single installation
- 10-year thermal sensor warranty
INTELLIGENT ALARMS
Advanced analytics enable detection of both thermal events and security threats.
- Detect intrusions and hot spots using onboard analytics
- Reduce false alarms with vehicle exclusion filtering
- Custom scheduling based on time, business hours, and seasonality
- Select thermal or visible analytics modes as needed
EASY INTEGRATION
Easily integrates into FLIR systems or third-party security platforms.
- NEXUS® technology enables seamless device connectivity
- Compatible with FLIR United VMS and third-party VMS platforms
- ONVIF® conformant (Profiles S/G/T)
- Supports radiometric alarm integration