RHP-BOS-DS-IF Dual Thermal Sensor Interface

$999.00

• Thermal & Visible Camera Enclosed In One Package
• Dual Camera Control via Serial Connection, Push Button, • Receiver PWM or Wireless Joystick
• 6 to 26 Volt DC Input
• Multi Window Mode - PiP, Split View, Single and Quad view
• 1920 x 1080 HD Visible camera included
• Onboard IMU for easy integration with a gimbal

IR Cut Filter Notice:
The RHP-BOS-DS-IF Dual camera interface includes a visible camera and lens and offered with or without an infrared cut filter.
An infrared cut filter (IR-cut filter) is used to block light with wavelengths longer than visible light while transmitting visible light. IR cut filters can operate by either reflecting or absorbing the light to be blocked. IR cut filters are often used in solid state (CCD or CMOS) video cameras to block infrared light, which otherwise causes a lowering of the contrast due to the high sensitivity of many camera sensors to near-infrared light. IR cut filters for this purpose are mostly operating by reflecting the IR portion of the light.

Visible Camera Lens Options

SKU: RHP-BOS-DS-IF W/ IR Filter

RHP-BOS-DS-IF Dual Thermal Sensor Interface

$999.00

Description

Specifications

Downloads

RHP-BOS-DS-IF

Boson Dual Sensor Interface

The RHP-BOS-DS-IF Dual Thermal Sensor Interface is an innovative solution that combines a Thermal and Visible Camera on one board. With Dual Camera Control via Serial Connection, it allows users to easily switch between thermal and visible imaging modes. The interface provides Push Button, SBUS, PWM or Wireless Joystick control, and works with 6 to 26 Volt DC power sources. The Multi Window Mode, PiP, Split View, Single and Quad view options make it easy to view video in various formats. The 1920 x 1080 HD Visible camera is included on board, along with an IMU for easy integration and gimbal compatibility.

Options for connecting the BOS-DS-IF are:

USB
S-Bus (16 Channels)
PWM (5 channels)

Multiple window modes:

Picture in Picture mode

Allows you to view one camera in a small frame and the other camera in the background.

Single View mode

See the complete view of either camera on the screen.

Split View Mode

Monitor both streams shown side by side.

Change Parameters On-The-Fly!

Assigning the features of the FLIR Boson can be done with the custom control GUI and programming interface (included). Once assigned to a controller, you can select color palettes, initiate the Flat Field Correction (FFC) Shutter, Optimize the Digital Detail Enhancement and engage the Thermal AGC without having to land.

Customize Your Control

Whether it's an RC Controller or 5 point D-pad, you can assign features and control the FLIR Boson, the amount of control is practically limitless.

Power Protection

With the intelligent polarity sensing protection, the RHP-BOS-DS-IF is designed to handle voltages ranging from 5-26 Volts DC.

RHP-BOS-DS-IF Dimensions

Video Output

Digital Video Output to HD

Image Sensor

1/2.8" Exmor R Progressive Scan CMOS

Spectral Band

LWIR | 7.5 µm – 13.5 µm

Digital Video Output

1080p60 / 720p60

Effective Pixels

2.13MP 1945(H) x 1097(V)

MAVLink Interface

3.3 Volt (5 Volt Tolerant) UART/TTL Protocol

Sensitivity/NEdT

<40 mK (Industrial) | <50 mK (Professional) | <60 mK (Consumer)

Remote Control

Yes – PWM (5 channels), S-Bus (16 Channels), MAVLink

Video Resolution

1920×1080(Full HD) 1280×720

Pixel Pitch

12 µm

14 Pin Accessory Port

Power Out (5Volts), PWM, S-Bus, MavLink

6 Pin Accessory Port

SDA/SCL (IMU), Ground, D+/D- (Boson USB)

f-number

1.0 – 1.1 (Depending on Model)

Minimum Illumination

0.2Lux(F1.6)

Weight

7.5 g without lens (configuration dependent), Approx. 3.6g

Input Voltage

3.3 VDC, 6-26VDC (14-PIN JST SVR Connector) 5.0 VDC USB-Micro Connector NOTE: Connecting the DS-IF/BOSON 640 to a computer does NOT provide sufficient power fo

Lens Type

Board Lens

Dimensions (L x W x H)

21 × 21 × 11 mm without lens

Control Channels

UART or USB

F-Value

F 2.0

Peripheral Channels

I2C, SPI, SDIO

Angle of View

112.3˚ (D) x 93.7˚ (H) x 49.3˚ (V)

Video Channels

CMOS or USB2

Day & Night Mode

AUTO/COLOR/BW

Full Frame Rate

60Hz baseline; 30 Hz runtime selectable

Dynamic Range

OFF/BLC/HLC/WDR

Image Orientation

Adjustable (vertical flip and/or horizontal flip)

White Balance

AUTO/PUSH/Manual

AE Mode

Auto/Manual/Flicker

Non-Uniformity Correction (NUC)["Brightness"]

Factory calibrated; updated FFCs with FLIR’s Silent Shutterless NUC (SSN™)["\t 0~20"]

Scene Range [high gain]

to +140 °C (high)

Manual Shutter

1/30(25), 1/60(50)~1/30000

Scene Range [low gain]

+500 °C (low)

Sense-Up

Off~32fields

Slow Frame Rate

≤9Hz available

Digital Slow Shutter

["\t Max.x32"]

Sensor Technology

Uncooled VOx microbolometer

Digital Zoom

Max.x16

Continuous Digital Zoom

1X to 8X zoom

Operational Altitude

12 km (max altitude of a commercial airliner or airborne platform)

Image Flip

Off/Horizontal/Vertical/H+V(180° Flip)

WDR

0~4

Shock

1,500 g @ 0.4 msec

BLC

Off/0~10, Area selectable

HLC

Off/0~20, Color selectable

Max.42dB

AGC

DNR

Off/Low/Middle/High

Defog

Off/Low/Middle/High/AUTO

Power Consumption

3.3V : Max. 200mA / 1.8V : Max 55mA / 1.2V : Max 460mA

Dimension (mm)

28mm X 28mm

Storage Temperature Range

-20℃~+60℃

Operating Humidity Range

20~95%

Storage Humidity Range

20~80%

RHP BOS DS IF .Step File

This .STEP file provides a detailed 3D model that ensures compatibility with various CAD software, facilitating seamless integration into your projects.
Download the file to access this valuable resource for your design and engineering needs.

RHP-BOS-DS-IF Dual Thermal Sensor Interface

RHP-BOS-DS-IF

Boson Dual Sensor Interface

Multiple window modes:

Picture in Picture mode

Single View mode

Split View Mode

Change Parameters On-The-Fly!

Customize Your Control

Power Protection

RHP BOS DS IF .Step File

RHP Boson Dual Sensor Interface Manual

RHP-BOS-DS-IF Dual Thermal Sensor Interface Datasheet