Neutrino™ SWaP+C Series
Neutrino SX8, f/3, with Shutter
The newly-released SXGA-resolution Neutrino SX8 provides best-in-class MWIR imagery and data in a small, lightweight package. Based on Teledyne FLIR’s High Operating Temperature (HOT) FPA technology and linear micro-cooler, SWaP series OEM camera modules are designed for ruggedized products requiring long life, low-power consumption, and quiet, low-vibration operation. Ideal for small gimbals and airframes, handheld devices, security cameras, targeting devices, and asset monitoring applications.
The Neutrino SWaP Series is simply the best technical solution available. With nearly off-the-shelf delivery (ITAR free), industry-leading two-year warranty, real price competitiveness and well-known product support and product reliability, it also offers the lowest risk solution. The Neutrino SWaP is an OEM camera module that is intended to be integrated into a higher level system.
Superior Performance, Faster Time to Market
MULTIPLE RESOLUTION SWAP
OPTIMIZED MWIR CAMERA CORES
SXGA/8 µm HOT FPA camera modules in a SWaP-optimized envelope offer low-power consumption, rugged construction, and a wide operating temperature range.
- T2SL HOT 640 x 512/15 μm pixel pitch FPA provides superb imagery, 2x faster time to image, and longer cooler lifetime
- Small and light at 7.4 x 4.5 x 6.1 cm and 370 grams
- Low power consumption with <8 W cool down and <4 W steady state @21°C
- Rugged construction and wide operational temperature range of -40°C to +71°C
- Quiet and low vibration operation
Small, light, and powerful, the Neutrino SWaP Series camera modules come with common interfaces and support documentation/accessories to shorten time-to-market and reduce project risk.
- Built-in support for physical and protocol-level industry standards (e.g. USB2)
- Full suite of hardware accessories
- FLIR XIR™ expandable infrared video processing architecture and robust SDK
- Classified under US Department of Commerce jurisdiction as EAR 6A003.b.4.a
The Neutrino SWaP Series cameras offer best-in-class image quality, an industry-leading two-year warranty, superior SWaP performance, high reliability, long lifetime, and come with Teledyne FLIR’s well-known product support.
- Industry’s most advanced SWaP+C optimized image processing
- Increased reliability and low-vibration FLIR linear micro-cooler
- Optional integrated shutter provides faster time to image
- Comprehensive product documentation
- Highly-qualified FLIR Technical Services
|Spectral Band||3.4 to ≥ 5.1 µm Standard|
|Non-Operating Temperature||-57°C to +80°C (-70.6°F to +176°F)|
|Resolution||1280 × 1024, 8µm pitch|
(50% well fill at TBB=30°C flood mode)
|Weight||< 420 grams (<15 oz)|
|Dimensions (L x W x H)||7.9 cm × 5.3 cm × 6.1 cm (3.1 × 2.1 × 2.4 in)|
|CONNECTIONS & COMMUNICATIONS|
|Communication||UART (115.2K baud)|
|Discrete I/O Controls Available||Yes, Three available|
|External Sync Input/Output||Master or Slave|
|Primary Electrical Connector||80-pin SAMTEC, ST4-40-2.50-L-D-P-TR|
|User Configurability via SDK & GUI||Yes|
|Direct Injection Snapshot Prog operation||Yes|
|Programmable Integration Time||Yes (.01ms - 16ms) at 60 Hz|
|ROIC Modes||Free Run, Readout Priority, & Integration Priority|
|Well Capacity||2.6 × 10⁶ electrons|
|IMAGING & OPTICAL|
|Color Palettes||Yes, RGB888 mode|
|Image Optimization||Linear, Histogram Equalization, DDE|
|Sensor Technology||HOT MWIR|
|Cold Aperture Height||19.4 mm from FPA|
|Zoom and Focus Controls||Yes|
|Symbology||Yes, RGB888 mode|
|Time to Image||<5 min 23°C ambient (goal)|
|Camera Link (Expansion Bus Accessory Module)||Yes|
|Continuous Digital Zoom||Yes, up to 8x|
|Frame Rate||1-60 Hz, configurable|
|Input Power Range||+5.0 VDC Camera, +12 VDC Cryocooler|
|Humidity||Non-condensing between 5% - 95%|
|Operational Altitude||~12km (40,000 ft)|
|Operating Temperature Range||-40°C to +71°C (-40°F to +160°F)|
|Shock||Lateral 190 g @ .55 ms;
Vertical 320 g @ .55 ms;
Axial 550 g @ .8 ms (goal)
|Vibration||5.8 grms 3-axis, 1hr each|
|Power Dissipation||<12 W cooldown, <8 W steady state @ 23°C|
Compatible with Neutrino SX8 Series
HOT MWIR Camera Technology
MWIR systems provide higher resolution and sensitivity compared to long wave infrared (LWIR) systems due to shorter waveband and cooled detector architecture. Constraints associated with cooled architecture historically limited MWIR technology to military systems or high-end commercial applications.
Recent advancements in high operating temperature (HOT) MWIR sensor technology improves size, weight, power consumption, and Cost (SWaP+C), increasing demand of MWIR camera systems for industrial, commercial, and defense applications. This growth is translating to increased demand for custom and production optical systems.
Teledyne FLIR has experienced a significant increase in demand for HOT MWIR products, specifically, the MWIR Neutrino® LC and Neutrino SX8 camera modules, particularly with integrated continuous zoom (CZ) optics. In response, Teledyne FLIR launched multiple models of the Neutrino IS series of SWaP+C MWIR camera modules with factory-integrated CZ optics in 2021. These integrated systems shown, leverage the design-for-manufacturing (DFM) process developed and followed within the Optical Systems Group.