By clicking on or navigating the site, you agree to allow us to collect information on and off this site through cookies. Learn more.
Videology 2xD05X -20D05X (NTSC) | 21D05X (PAL)
DXD05X Highlights:
- Near IR Sensitive
- 1/3" B&W CCD sensor
- CCIR / EIA (720H)
- Low noise and low blooming Provides analog (CVBS) and digital (BT.656) video output simultaneously
- Miniature rugged 32mm x32mm single board
- Software controllable features and functions
- Lens Mounts: metal CS, M12 board or pinhole
SKU
2xD05X
Videology 2xD05X 720H 1/3” CCD B&W Board Camera
BT.656 and CVBS Video Output Simultaneously
Videology’s 20D05X is a 32mm x 32mm board, 1/3" CCD sensor with 610K pixels for PAL and 520K pixels for NTSC (720H).
| Electrical | |
|---|---|
| Image Sensor | 1/3" B&W CCD Sensor |
| Active Pixels | 768 x 494 (EIA), 752 x 582 (CCIR) |
| Shutter Mode | Global (Interlaced) |
| Horizontal Resolution | 720H |
| Sensitivity | < 0.005 Lux F.2 @ 20 IRE < 0.0005 Lux F.2 @ 50 IRE |
| Signal to Noise ratio | > 51 dB ±0.5 |
| Video Output | Composite 1Vp-p 75 Ohms, Digital 8-bits BT.656 |
| Power Input | 5VDC - 15VDC +/- 5% |
| Power Consumption | <1.0 Watts |
| Controls | |
| Serial interface | Two wire data/clock up to 100kHz |
| Shutter speeds | 11 fixed speeds via software EIA - Automatic from 1/60 to 1/100,000 CCIR - Automatic from 1/50 to 1/100,000 |
| Mirror mode | Default off; selectable via software |
| Back Light Compensation | Default off: selectable via software |
| Gamma | 0.45, fixed |
| AGC Control | Automatic 36 dB (AGC default) or fixed options via software |
| White Balance Mode | AWB auto (default); other modes selectable via software |
| Environmental | |
| Operating Temperature | -10°C ~ 50°C (14°F ~ 122°F) |
| Operating Humidity | 30% to 90% |
| Storage Temperature | -40°C ~ 70°C (22°F ~ 176°F) |
| Storage Humidity | 85% RH |
| Lifetime MTBF | > 150,000 hrs |
| Mechanical | |
| Dimensions WxHxD | 32mm x 32mm x 14mm (1.26" x 1.26" x 0.55") |
| Weight | 6.2g (0.2 oz) without lens mount |
| Lens mounts | Replace "X" in model number with desired lens mount option: |
| Example: To select an M-12 Board Mount Change 20D05X to 20D055 | |
| 2 = M-12 pinhole mount 5 = M-12 board mount 8 = CS mount |
|
| Connectors | J100 6 pin connector JST SM06B-SRSS (I²C, CVBS, PSU) |
| J101 30 pole B2B connector Molex 501920-3001 (digital output) | |
