The new Neutrino LC is a SWaP+C optimized Mid Wave Infrared (MWIR) camera core, setting a new standard for size, weight, performance and cost. Designed for integrators, the Neutrino LC is compact and configurable, weighing in at only 380 grams with a steady power consumption of <4 watts, in a steady state @23 °C. Smaller, lighter, and more reliable than ever, the Neutrino LC delivers superb thermal imagery backed by industry-leading integration support from FLIR.

HOT FPA Technology for SWaP+C Optimized Camera Core

COMPACT AND CONFIGURABLE VGA HOT HD+MWIR CAMERA CORE

The High Operating Temperature (HOT) FPA offers low power consumption, rugged construction and a wide operating temperature.

T2SL HOT 640 x 512/15 μm pixel pitch FPA provides superb imagery, 2x faster time to image, and longer cooler lifetime
Small and light at 7.4 x 4.5 x 6.1 cm and 370 grams
Low power consumption with <8 W cool down and <4 W steady state @21°C
Rugged construction and wide operational temperature range of -40°C to +71°C
Quiet and low vibration operation

DESIGNED FOR INTEGRATORS

Small, light, and powerful, the Neutrino LC produces superb thermal imagery using a HOT 640 × 512 15µm FPA, while weighing in at only 370 grams.

Built-in support for physical and protocol-level industry standards (e.g. USB2)
Full suite of hardware accessories
FLIR XIR™ expandable infrared video processing architecture and robust SDK
Classified under US Department of Commerce jurisdiction as EAR 6A003.b.4.a

PERFORMANCE, RELIABILITY, AND SUPPORT

The Neutrino LC offers increased reliability and low-vibration linear micro-cooler, faster time to image and FLIR reliability and support.

Industry’s most advanced SWaP+C optimized image processing
Increased reliability and low-vibration FLIR linear micro-cooler
Optional integrated shutter provides faster time to image
Comprehensive product documentation
Highly-qualified FLIR Technical Services

OVERVIEW
Spectral Band	3.4 to ≥ 5.1 µm Standard
Non-Operating Temperature	-57°C to +80°C (-70.6°F to +176°F)
Sensitivity [NEdT]	< 38mK (50% well fill at TBB=30°C flood mode)
f-number	f/4, f/3 & f/2.5 options
Weight	< 420 grams (<15 oz)
Dimensions (L x W x H)	7.9 cm × 5.3 cm × 6.1 cm (3.1 × 2.1 × 2.4 in)
CONNECTIONS & COMMUNICATIONS
Communication	UART (115.2K baud)
Discrete I/O Controls Available	Yes, Three available
USB	Yes
External Sync Input/Output	Master or Slave
Primary Electrical Connector	80-pin SAMTEC, ST4-40-2.50-L-D-P-TR
User Configurability via SDK & GUI	Yes
FPA CONTROL
Direct Injection Snapshot Prog operation	Yes
Programmable Integration Time	Yes (.01ms - 16ms) at 60 Hz
ROIC	ISC1601
ROIC Modes	Free Run, Readout Priority, & Integration Priority
Well Capacity	2.6 × 10⁶ electrons
IMAGING & OPTICAL
Color Palettes	Yes, RGB888 mode
Array Format	1280 × 1024, 8µm pitch
Invert/Revert	Yes
Image Optimization	Linear, Histogram Equalization, DDE
Sensor Technology	HOT MWIR
Shutter	Available Option
Parallel (24-bit/16-bit/8-bit)	Yes
Cold Aperture Height	19.4 mm from FPA
NTSC/PAL (field switchable)	N/A
Zoom and Focus Controls	Yes
Symbology	Yes, RGB888 mode
Time to Image	<5 min 23°C ambient (goal)
Camera Link (Expansion Bus Accessory Module)	Yes
Continuous Digital Zoom	Yes, up to 8x
Frame Rate	1-60 Hz, configurable
POWER
Input Power Range	+5.0 VDC Camera, +12 VDC Cryocooler
ENVIRONMENTAL
Humidity	Non-condensing between 5% - 95%
Operational Altitude	~12km (40,000 ft)
Operating Temperature Range	-40°C to +71°C (-40°F to +160°F)
Shock	Lateral 190 g @ .55 ms; Vertical 320 g @ .55 ms; Axial 550 g @ .8 ms (goal)
Vibration	5.8 grms 3-axis, 1hr each
POWER
Power Dissipation	<12 W cooldown, <8 W steady state @ 23°C