By clicking on or navigating the site, you agree to allow us to collect information on and off this site through cookies. Learn more.
The RHPC-2500 is a popular high resolution 1/4" CMOS OEM board camera. Using a compact 22mm x 26mm single board base for the 1/4" image sensor, this board camera is ideal for applications requiring a smaller platform.
With a 5 Volt DC low power connection, this camera provides great resolution, color, and quality video.
The RHPC-2500 is also the direct replacement for the Panasonic GP-CX171 (High Res) and the RHPC-2000.
The RHPC-2500 does not require Heat Sync like the former GP-CX171, the RHPC-2500 also has the same hole pattern, connectors, and pin-out. Therefore this camera makes for a more compact replacement than its predecessors.
This camera features extra functions controllable via PC Software, which can be purchased separately. The software for this unit allows plenty of options for managing your video.
|Image Sensor||1/4" CMOS|
|Resolution (HxV)||640 x 480 (max)|
|Frame Rate||30fps (NTSC) 25fps (PAL)|
|Sensitivity||< 0.05 lux, (50 IRE) F1.2, 3200°K,
lens transmission 80%,
scene reflection 75%
|Signal to Noise Ratio||> 46 dB digital output|
|Gain Control||Automatic 36 dB (AGC default) or Fixed options via software|
|Mirror Mode||Selectable via software|
|Back Light Compensation||Default off (selectable via software)|
|White Balance Mode||AWB (fixed modes selectable via software)|
|Contour Enhancement||Default on|
|Iris Control||Electronic Rolling Shutter|
|Shutter Speed||Automatic from 1/60 to 1/100,000 (NTSC)
Automatic from 1/50 to 1/100,000 (PAL)
|Video Outputs||8-bit digital YUV 4:2:2 @ CCIR656|
|Control Communication||I²C control|
|Power supply||4.5-12VDC +/- 5%
(not polarity protected)
|Power consumption||< 0.8W|
-40°F ~ 122°F
|Operating Humidity||20 up to 93%RH|
|Storage Temperature||-40°F ~ 194°F
(-40°C ~ 90°C)
|Storage Humidity||Up to 98%RH|
|Lifetime MTBF||> 150,000 hrs|
|Packaging||ESD safe package|
|1" x 0.87" x 0.43"
(22mm x 26mm x 11mm)
|Available Lens mounts||M-12 board mount (included - standard)
CS mount (available upon request)
• 2.1mm f2.0 1/3in
|• 3.8mm f2.0 1/3in
• 4.0mm f2.0 1/3in
• 6.0mm f2.0 1/3in
• 8.0mm f2.0 1/3in
|• 12mm f2.0 1/3in
• 16mm f2.0 1/3in
• 25mm f2.5 1/3in
||J102||Power/ analog video/ 6pin mount I²C connector|
|Vertical JST: BM06B-SRSS|
||Power/ video/ digital YUV,
all in a 30 pole board to board connector
|MOLEX-501920-3001||Board to Board connector (J102)|
must be used on the application side