{"product_id":"flir-tau-pcb-wearsaver-with-solder-pads-421-0047-00-htm","title":"Teledyne FLIR Tau PCB Wearsaver with Solder Pads","description":"\u003ch3\u003eFLIR Tau PCB Wearsaver with Solder Pads\u003c\/h3\u003e\n\u003cp\u003eA low-profile adapter that attaches to the Tau's 50-pin Hirose connector, furnishing a solder pad interface. Schematic included.\u003c\/p\u003e\n\u003cp\u003eThe Tau2 Wearsaver was designed to be an internal engineering\/manufacturing calibration accessory, rather than an OEM interface. \u003cbr\u003eThere is a Hirose mating connector on one side of the board, as shown in the picture below:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0794\/0718\/6139\/files\/wearsaver-front-6fa.jpg\" style=\"width: 250px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eWhen the Wearsaver is attached to the Tau2 camera, there are no exposed connectors, just the solder pads for a 20-pin Samtec (and 14 pads for pogo pins). \u003c\/p\u003e\n\u003cp\u003eThe pad connections are limited to input power, RS-232, analog video, and LVDS. \u003c\/p\u003e\n\n\u003cp\u003eThe Wearsaver board does NOT provision for External Sync, Discretes, or CMOS signals. \u003c\/p\u003e\n\u003cp\u003eThe physical layout is shown in the picture below: \u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0794\/0718\/6139\/files\/wearsaver-back-93c.jpg\" style=\"width: 250px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e","brand":"Teledyne FLIR","offers":[{"title":"Default Title","offer_id":48183377559771,"sku":"421-0047-00","price":136.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/0718\/6139\/files\/421-0047-00-690.jpg?v=1769179443","url":"https:\/\/www.oemcameras.com\/products\/flir-tau-pcb-wearsaver-with-solder-pads-421-0047-00-htm","provider":"OEMCameras.com","version":"1.0","type":"link"}