-
$699.00 – $828.95Price range: $699.00 through $828.95
- Material: Anodized Aluminum
- Size (L x W x H): 82mm x 47mm x 52mm**
- 2 x 1/4″-20 Mount Points
- Encapsulation: IP67 Rated
- Weight: < 11 oz. (< 300g)
Compatible With:
| Boson/Boson+ 320* |
Boson/Boson+ 640* |
|
2.3mm | 92° HFoV
4.3mm | 50° HFoV
4.5mm | 50° HFoV SL Rad.
6.3mm | 34° HFoV
6.3mm | 34° HFoV Rad.
9.1mm | 24° HFoV
13.8mm | 16° HFoV
18mm | 12° HFoV |
4.9mm | 95° HFoV
4.9mm | 95° HFoV SL
8.7mm | 50° HFoV
9.2mm | 50° HFoV SL Rad.
13.6mm | 32° HFoV SL
13.6mm | 32° HFoV SL Rad.
13.6mm | 32° HFoV NS
14mm | 32° HFoV
18mm | 24° HFoV
18mm|24° HFoV SL
18mm|24° HFoV Rad.
24mm | 18° HFoV
24mm | 18° HFoV Rad. |
| SL=Short Lens | Rad.=Radiometric | NS=No Shutter |
| *Teledyne FLIR Boson Thermal Imaging Cameras sold separately. |
| **Measurement does not include connector. Future 95° version width may increase to 48mm. |
-
$499.00
Control the FLIR BOSON remotely with the “RC-HD-IF” Remote Control Interface.
- 6 to 26 Volts DC Input
- HD and Composite Outputs
- Reverse Polarity Protection
- Control w/RC Receiver
- USB Video Support
- S-Bus & PWM
- Compatible with most digital HDMI transmitters
- Setup and Calibration Software Included
- Weight: 12 grams
-
$999.00
- Thermal & Visible Camera Enclosed In One Package
- Dual Camera Control via Serial Connection, Push Button, Receiver PWM or Wireless Joystick
- 6 to 26 Volt DC Input
- Multi Window Mode – PiP, Split View, Single and Quad view
- 1920 x 1080 HD Visible camera included
- Onboard IMU for easy integration with a gimbal
IR Cut Filter Notice:
The RHP-BOS-DS-IF Dual camera interface includes a visible camera and lens and offered with or without an infrared cut filter.
An infrared cut filter (IR-cut filter) is used to block light with wavelengths longer than visible light while transmitting visible light. IR cut filters can operate by either reflecting or absorbing the light to be blocked. IR cut filters are often used in solid state (CCD or CMOS) video cameras to block infrared light, which otherwise causes a lowering of the contrast due to the high sensitivity of many camera sensors to near-infrared light. IR cut filters for this purpose are mostly operating by reflecting the IR portion of the light.
-
- Dual USB Video over single interface
- Optically Centered
- IMU for Gimbal Control
- 2x additional USB ports for other sensors or cameras
- Small form factor
- Wide input range 5-26VDC
- Ideal for Drone, UAV, UGV Implementation
- No drivers Required
- Compatible with Windows, Mac and Linux Operating systems
-
$3,872.00 – $4,200.00Price range: $3,872.00 through $4,200.00
- IP54 rated
- 50mm x 36mm x 43mm (depth)
- 56 grams
- 2.9W max power, 1.8W typical power
IR Thermal Camera:
- Radiometric 640 x 512 Boson
- 13.6mm
- 32° HFOV
- MIPI (2-lanes)
- MIPI, I2C
EO Visible Camera:
- 64 MP Sensor
- 67° HFOV
- MIPI (4-lanes),
- MIPI, I2C input
- Configurable to low-light applications
Hadron 640R <40mK NEDT SKU:70640AS32–6PMRXX – $3872.00
Hadron+ 640R <20mK NEDT SKU:70640AS32–6PARXP – $4200.00
Hadron+ 640 <20mK NEDT SKU:70640AS32–6PAAXP – $4100.00
Hadron Development Kits are now available.
-
$1,000.00 – $2,000.00Price range: $1,000.00 through $2,000.00
Maximize efficiency with the Hadron 640R* Development Kits. The new development kits enable integrators to start imaging with the SWaP-optimized Hadron 640R radiometric thermal and visible cameras within just hours using the NVIDIA Jetson Nano, the Qualcomm RB5, and the Qualcomm 865.
- Qualcomm 865
- Nvidia Nano
- Qualcomm rb5
Communication with the EO camera is achieved via MIPI or I2C. For the Boson camera MIPI, I2C, or USB protocols can be used.
421-0094-00 H640R Qualcomm 865 Test Kit – $1,000.00
421-0095-00 H640R Nvidia Nano Test Kit – $1,000.00
421-0096-00 H640R Qualcomm RB5 Test Kit – $2,000.00
*Teledyne FLIR Hadron 640 sold separately.
