Showing 1–20 of 93 results
-
$699.00 – $828.95Price range: $699.00 through $828.95
- Material: Anodized Aluminum
- Size (L x W x H): 82mm x 47mm x 52mm**
- 2 x 1/4″-20 Mount Points
- Encapsulation: IP67 Rated
- Weight: < 11 oz. (< 300g)
Compatible With:
| Boson/Boson+ 320* |
Boson/Boson+ 640* |
|
2.3mm | 92° HFoV
4.3mm | 50° HFoV
4.5mm | 50° HFoV SL Rad.
6.3mm | 34° HFoV
6.3mm | 34° HFoV Rad.
9.1mm | 24° HFoV
13.8mm | 16° HFoV
18mm | 12° HFoV |
4.9mm | 95° HFoV
4.9mm | 95° HFoV SL
8.7mm | 50° HFoV
9.2mm | 50° HFoV SL Rad.
13.6mm | 32° HFoV SL
13.6mm | 32° HFoV SL Rad.
13.6mm | 32° HFoV NS
14mm | 32° HFoV
18mm | 24° HFoV
18mm|24° HFoV SL
18mm|24° HFoV Rad.
24mm | 18° HFoV
24mm | 18° HFoV Rad. |
| SL=Short Lens | Rad.=Radiometric | NS=No Shutter |
| *Teledyne FLIR Boson Thermal Imaging Cameras sold separately. |
| **Measurement does not include connector. Future 95° version width may increase to 48mm. |
-
$129.95
- VPC – Video, Power & Communication
- 5 to 26Volts DC Input
- Reverse Polarity Protected
- Power via USB
- USB Video Support
- Stream Video to PC via USB
- 2 Composite Video Outputs
- Ext. Video SYNC In/Out Option
- Low Profile
- Works with Boson 320 or 640 Version
-
$159.99
- Improved heat dissipation
- VPC – Video, Power & Communication
- 5 to 26Volts DC Input
- Reverse Polarity Protected
- Power via USB3
- USB3 Video Support
- Stream Video to PC via USB3
- Ext. Video SYNC In/Out Option
- Low Profile
- Works with Boson 320 or 640 Version
-
$95.00
- VPC – Video, USB Power & Communication
- Power via 5Volt USB
- USB Video Support
- Stream Video to PC via USB
- Low Profile
- Works with FLIR Lepton 3.5 radiometric
-
$399.00
- Camera Link SDR-26 Base Mode Video Output
- Wide input voltage range of 5-26VDC
- Reverse Polarity Protection
- Master / Slave Sync Option (30Hz Only)
- USB Video and Control
- USB Video Support
- Allows for use with Boson Tripod Mount Adapter
-
$299.95 – $599.90Price range: $299.95 through $599.90
- 5-26VDC Input 6V-26VDC recommended
- Power over LVDS
interface is possible.
- Upscale video to 1080p and output over LVDS for backwards
compatibility with existing systems.
- Compatible with LVDS IP Encoder for ONVIF compliant output
- USB Setup and Configuration
- 3 Configurable profiles for power up defaults
- Compatible with RHP IP LVDS Encoder Board
-
$499.00
Control the FLIR BOSON remotely with the “RC-HD-IF” Remote Control Interface.
- 6 to 26 Volts DC Input
- HD and Composite Outputs
- Reverse Polarity Protection
- Control w/RC Receiver
- USB Video Support
- S-Bus & PWM
- Compatible with most digital HDMI transmitters
- Setup and Calibration Software Included
- Weight: 12 grams
-
$399.00
Ideal for sUAS and UAV Operations
- 6 to 26 Volts DC Input
- Reverse Polarity Protection
- Control w/RC Receiver
- S-Bus & PWM
- USB Video Support
- Color Palette Selection
- (FFC) Flat Field Correction Shutter Control
- (DDE) Digital Detail Enhancement
- Thermal AGC
- Continuous Digital Zoom
- 2 Composite Video Outputs
- USB Video Output
- 5.8 grams
-
$149.00
- VPC – Video, Power & Communication
- USB or TTL Communication
- Power via USB or 5 to 26Volts DC Input
- Reverse Polarity Protected
- USB Video Support
- Stream Video to PC via USB
- 2 Composite Video Outputs
- Available with Sync Input/Output
- Low Profile
- Alternate connection ports
-
$299.95
- LVDS Digital Output
- 1080p 30(25) fps (H.264)
- Connects to LAN/Onvif Compliant applications
- 12V power or POE
- Interfaces with Boson LVDS Encoder Board
-
$999.00
- Thermal & Visible Camera Enclosed In One Package
- Dual Camera Control via Serial Connection, Push Button, Receiver PWM or Wireless Joystick
- 6 to 26 Volt DC Input
- Multi Window Mode – PiP, Split View, Single and Quad view
- 1920 x 1080 HD Visible camera included
- Onboard IMU for easy integration with a gimbal
IR Cut Filter Notice:
The RHP-BOS-DS-IF Dual camera interface includes a visible camera and lens and offered with or without an infrared cut filter.
An infrared cut filter (IR-cut filter) is used to block light with wavelengths longer than visible light while transmitting visible light. IR cut filters can operate by either reflecting or absorbing the light to be blocked. IR cut filters are often used in solid state (CCD or CMOS) video cameras to block infrared light, which otherwise causes a lowering of the contrast due to the high sensitivity of many camera sensors to near-infrared light. IR cut filters for this purpose are mostly operating by reflecting the IR portion of the light.
-
$199.95
- VPC Kit with reversible USB-C connector
- Supports both USB2 and USB3 speeds
- Sync IO to synchronize images with other devices
- Allows users to stream multiple 16bit video streams at full 60Hz.
- Fits with Boson Tripod mount for thermal heatsinking
- Matches FLIR USB-C USB 2.0 VPC kit profile for backwards compatibility to existing systems
-
$41.00
Single USB interface cable for the Boson VPC with USB-C to USB-A Cable and BNC.
-
$64.00
Custom tool to change lens focus.
-
-
$6,813.00 – $8,095.00Price range: $6,813.00 through $8,095.00
Teledyne FLIR has announced the end of life (EOL) for all Tau 2 and Tau 2+ longwave infrared (LWIR) imaging camera modules.
Part numbers starting with 46640001, 47640001, and 48640001.
The size, weight, and power (SWaP) optimized Boson is the recommended replacement LWIR camera module.
Sales on this product end on Jun 30, 2025
- 640 x 512 Pixels
- Lensless Version
- Frame Rate: Fast 30Hz or Slow <9Hz Available
- 17μm Pixel Pitch
- 72 Grams
- LWIR
Performance Grade <50mK NEDT SKU:46640001X-FPNLX – $6813.00
Industrial Grade <30mK NEDT SKU:46640001X-FINLX – $8096.00
Interfaces and Accessories sold separately.
-
- Dual USB Video over single interface
- Optically Centered
- IMU for Gimbal Control
- 2x additional USB ports for other sensors or cameras
- Small form factor
- Wide input range 5-26VDC
- Ideal for Drone, UAV, UGV Implementation
- No drivers Required
- Compatible with Windows, Mac and Linux Operating systems
-
$3,872.00 – $4,200.00Price range: $3,872.00 through $4,200.00
- IP54 rated
- 50mm x 36mm x 43mm (depth)
- 56 grams
- 2.9W max power, 1.8W typical power
IR Thermal Camera:
- Radiometric 640 x 512 Boson
- 13.6mm
- 32° HFOV
- MIPI (2-lanes)
- MIPI, I2C
EO Visible Camera:
- 64 MP Sensor
- 67° HFOV
- MIPI (4-lanes),
- MIPI, I2C input
- Configurable to low-light applications
Hadron 640R <40mK NEDT SKU:70640AS32–6PMRXX – $3872.00
Hadron+ 640R <20mK NEDT SKU:70640AS32–6PARXP – $4200.00
Hadron+ 640 <20mK NEDT SKU:70640AS32–6PAAXP – $4100.00
Hadron Development Kits are now available.
-
$1,000.00 – $2,000.00Price range: $1,000.00 through $2,000.00
Maximize efficiency with the Hadron 640R* Development Kits. The new development kits enable integrators to start imaging with the SWaP-optimized Hadron 640R radiometric thermal and visible cameras within just hours using the NVIDIA Jetson Nano, the Qualcomm RB5, and the Qualcomm 865.
- Qualcomm 865
- Nvidia Nano
- Qualcomm rb5
Communication with the EO camera is achieved via MIPI or I2C. For the Boson camera MIPI, I2C, or USB protocols can be used.
421-0094-00 H640R Qualcomm 865 Test Kit – $1,000.00
421-0095-00 H640R Nvidia Nano Test Kit – $1,000.00
421-0096-00 H640R Qualcomm RB5 Test Kit – $2,000.00
*Teledyne FLIR Hadron 640 sold separately.
-
For Boson+
For Boson+ 640
Continuous Zoom
- 640 x 512 resolution, 12 μm pixel pitch
- LWIR microbolometer
- ≤20 mK thermal sensitivity
- Rugged construction with an operating temperature rating of -40 °C to 80 °C
- Upgraded AGC provides blacker blacks and whiter whites
Interfaces and Accessories sold separately.
