Search

FLIR Photon Replicator Board CoverRear Cover for the FLIR Photon/Tau Series Thermal Cameras...

P/N: FLIR-VPC-REG 5 Volt DC 500mA Regulated Output to Mini USB for VPC Module - 7~32 Volt DC Input 18" Bare Leads with Reverse Voltage Protection $50.00 Each / Can only be purchased with Tau Cameras..

FLIR 12V 4" Blackbody Source for ALC & Supplemental FFC, offers a uniform temperature source for FLIR Tau 2 Thermal Cameras.Low cost 4-inch blackbody which provides a uniform temperature source when using FLIR's Alt Lens Cal software to field-calibrate lens-less Photon or Tau cameras with third-party lenses, or to take advantage of the Supplemental Flat Field Correction (FFC) option available in the Tau 2, Vue Pro and many other  radiometric camera models. A blackbody is an important..

PCB Assembly Lens Focus Tool Tripod Mount VPC Module Photon Replicator Board Locking Nut  Tau Locking Nut Tau Quick Start Guide USB Flash Drive Latching Cable Assembly Latching Connector, 30pin Contact Pins (30ea) 1.5mm Hex Key All-In-One Package Everything You Need To Get Started TAU Sold Separately The FLIR TAU/Quark starter kit includes: PCB Assembly - TAU/Quark Development (250-0487-00) VPC Module - TAU/Quark, Accessory (421-0048-00) Tripod Mount - TAU..

The Camera Link module is an expansion board for the Tau cameras that matches the functionality of the VPC Module and adds the ability to access digital data via Camera Link connection. The Camera Link module takes CMOS-type digital data from the Tau camera and converts it to Camera Link. This module does not include a Camera Link cable, frame grabber, or capture software.The Tau Camera is powered through the mini-USB connector with a nominal draw of 250mA at 5VDC for both the camera and the acc..

Teledyne FLIR NFOV Lens Holder for the FLIR TAU 2 Thermal Cameras..

FLIR Tau PCB Wearsaver with Solder PadsA low-profile adapter that attaches to the Tau's 50-pin Hirose connector, furnishing a solder pad interface. Schematic included.The Tau2 Wearsaver was designed to be an internal engineering/manufacturing calibration accessory, rather than an OEM interface. There is a Hirose mating connector on one side of the board, as shown in the picture below: When the Wearsaver is attached to the Tau2 camera, there are no exposed connectors, just the solder pads for ..

..

FLIR SDK software for the FLIR TAU Series Cameras The Tau Software Developer's Kit (SDK part number enables camera control using one of several programming languages including VB6, VB.net, C#, and C++ (MFC). Code examples are included to help illustrate how some of the camera control functions can be used. The FLIR Camera Controller GUI is an example of an application created using the Tau SDK...

This adapter allows you to convert two of the mounting points on the Tau camera to a standard 1/4" x 20 tripod mounting plate. This adapter also works with the FLIR VUE series cameras: FLIR VUE FLIR VUE PRO FLIR VUE PRO R Adapt two of the mounting points on the Tau camera to a standard 1/4" x 20 tripod mounting plate. The tripod adapter mounts to the bottom of Tau camera using two furnished socket head screws...

..