Search

FLIR FC-304-IDThermal Analytics Security Camera The FLIR FC-304-ID combines best-in-class thermal image detail and high performance edge perimeter analytics in a single device that delivers optimal intrusion detection in challenging environments and extreme conditions. FC-Series ID cameras feature on-board video analytics optimized for FLIR’s thermal sensors. Easy to set up and capable of classifying human or vehicular intrusions, FC-Series ID cameras provide reliable detection with v..

FLIR FC-309-ID Thermal Analytics Security Camera The FLIR FC-309-ID combines best-in-class thermal image detail and high performance edge perimeter analytics in a single device that delivers optimal intrusion detection in challenging environments and extreme conditions. FC-Series ID cameras feature on-board video analytics optimized for FLIR’s thermal sensors. Easy to set up and capable of classifying human or vehicular intrusions, FC-Series ID cameras provide reliable detection with v..

FLIR FC-313-ID Thermal Analytics Security Camera The FLIR FC-313-ID combines best-in-class thermal image detail and high performance edge perimeter analytics in a single device that delivers optimal intrusion detection in challenging environments and extreme conditions. FC-Series ID cameras feature on-board video analytics optimized for FLIR’s thermal sensors. Easy to set up and capable of classifying human or vehicular intrusions, FC-Series ID cameras provide reliable detection with very..

Quick-Disconnect Conversion: Customize thermal capability for mission-specific tasks with three lens options – QD35, QD65, or QD100 extended range. High-performance lenses are rapidly attached via integral quick disconnect mount.    • 5°(H) × 3°(V) FOV (320x240) • 6°(H) × 4°(V) FOV (640x480) What's in the Box • Lens Cap• Lens Cover• Lens Cloth  ..

Quick-Disconnect Conversion: Customize thermal capability for mission-specific tasks with three lens options – QD35, QD65, or QD100 extended range. High-performance lenses are rapidly attached via integral quick disconnect mount.    • 13°(H) × 10°(V) FOV (320x240) • 18°(H) × 13°(V) FOV (640x480) What's in the Box • Lens Cap• Lens Cover• Lens Cloth  ..

PCB Assembly Lens Focus Tool Tripod Mount VPC Module Photon Replicator Board Locking Nut  Tau Locking Nut Tau Quick Start Guide USB Flash Drive Latching Cable Assembly Latching Connector, 30pin Contact Pins (30ea) 1.5mm Hex Key All-In-One Package Everything You Need To Get Started TAU Sold Separately The FLIR TAU/Quark starter kit includes: PCB Assembly - TAU/Quark Development (250-0487-00) VPC Module - TAU/Quark, Accessory (421-0048-00) Tripod Mount - TAU..

The Tau 2 board spacer accessory allows add-on electronics to be securely mounted to the camera body. An example is the Camera Link module accessory for Tau 2...

The Tau 2 video/power/control (VPC) is an accessory that adapts the native high-density electrical interface to a USB Mini-B connector for power and control, as well as an MCX (micro-coaxial) connector for analog video. This part number is for the VPC only, cables are not included...

The Camera Link module is an expansion board for the Tau cameras that matches the functionality of the VPC Module and adds the ability to access digital data via Camera Link connection. The Camera Link module takes CMOS-type digital data from the Tau camera and converts it to Camera Link. This module does not include a Camera Link cable, frame grabber, or capture software.The Tau Camera is powered through the mini-USB connector with a nominal draw of 250mA at 5VDC for both the camera and the acc..

FLIR NFOV Lens Holder for the FLIR TAU 2 Thermal Cameras..

FLIR Tau PCB Wearsaver with Solder PadsA low-profile adapter that attaches to the Tau's 50-pin Hirose connector, furnishing a solder pad interface. Schematic included.The Tau2 Wearsaver was designed to be an internal engineering/manufacturing calibration accessory, rather than an OEM interface. There is a Hirose mating connector on one side of the board, as shown in the picture below: When the Wearsaver is attached to the Tau2 camera, there are no exposed connectors, just the solder pads for ..

Expansion board for Tau SWIR cameras that matches the functionality of the VPC module, and adds the ability to access digital data via mini-Camera Link connection. Installation instructions can be found in the Tau SWIR Users Guide. The Kit includes: Camera Link Expansion Board 6-ft MCX to BNC video cable 3-ft USB-A to Mini-B cable 5W-5VDC power supply. ** Does not include Camera Link cable, frame grab board, or data capture software...

The Tau SWIR video/power/control (VPC) is an accessory that adapts the native high-density electrical connector to a mini-USB interface for power and control, and mini-coaxial (MCX) connector for analog video. The Kit includes: VPC adapter 6-ft MCX to BNC video cable 3-ft USB-A to Mini-B cable 5W-5VDC power supply...

This adapter allows you to convert two of the mounting points on the Tau camera to a standard 1/4" x 20 tripod mounting plate. This adapter also works with the FLIR VUE series cameras: FLIR VUE FLIR VUE PRO FLIR VUE PRO R Adapt two of the mounting points on the Tau camera to a standard 1/4" x 20 tripod mounting plate. The tripod adapter mounts to the bottom of Tau camera using two furnished socket head screws...

FLIR Photon Replicator Board CoverRear Cover for the FLIR Photon/Tau Series Thermal Cameras...

TEC Power Cable Accessory for FLIR TAU SWIR Thermal Cameras..

FLIR 12V 4" Blackbody Source for ALC & Supplemental FFC, offers a uniform temperature source for FLIR Tau 2 Thermal Cameras.Low cost 4-inch blackbody which provides a uniform temperature source when using FLIR's Alt Lens Cal software to field-calibrate lens-less Photon or Tau cameras with third-party lenses, or to take advantage of the Supplemental Flat Field Correction (FFC) option available in the Tau 2, Vue Pro and many other  radiometric camera models. A blackbody is an important..