Menu
Your Cart

RHP Boson RC-HD-IF Remote Control Interface

RHP Boson RC-HD-IF Remote Control Interface
RHP Boson RC-HD-IF Remote Control Interface
RHP Boson RC-HD-IF Remote Control Interface
RHP Boson RC-HD-IF Remote Control Interface
RHP Boson RC-HD-IF Remote Control Interface
RHP Boson RC-HD-IF Remote Control Interface
RHP Boson RC-HD-IF Remote Control Interface
RHP Boson RC-HD-IF Remote Control Interface
RHP Boson RC-HD-IF Remote Control Interface
RHP Boson RC-HD-IF Remote Control Interface
RHP Boson RC-HD-IF Remote Control Interface

Control the FLIR BOSON remotely with the "RC-HD-IF" Remote Control Interface.

  • 6 to 26 Volts DC Input
  • HDMI and Composite Outputs
  • Reverse Polarity Protection
  • Control w/RC Receiver
  • S-Bus & PWM
  • Compatible with most digital HDMI transmitters
  • Setup and Calibration Software Included

  • Availability: In Stock
  • SKU: rhp-bos-rc-hd-if
$499.00

Available Options

When attaching this Interface, please use proper personal grounding (or grounding wrist strap) to prevent static damage to the module.

RHP-BOS-RC-HD-IF

Integrate the FLIR Boson into your UAS.

The RHP-BOS-RC-HD-IF allows you to control the Boson camera remotely using a 16 Channel S-Bus Signal or up to 5 PWM Signals from your wireless Joystick Remote Control System. Now you can assign any available parameter on the Boson to any knob, switch or lever on your Joystick Remote Controller and adjust these camera parameters ‘on-the-fly’.

With the HD Video output, video signal can be transmitted securely through a video transmitter in 720 or 1080p. The analog output allows for a composite video signal simultaneously, enabling you to connect to a recording device.

This module accepts a wide input voltage range of 6 to 26 Volts DC with reverse polarity protection while powering your Remote Control receiver with a regulated 5 Volts DC.

Both HD and Composite Video Outputs are available allowing connection to two separate video devices with no signal loss.



   

Customize and Save Configurations

Save configurations for different applications.
• Control via PC
• 16 Channels (S-Bus)
• 5 Channel PWM.
• 5 Channel D-Pad.
• Customize and Assign parameters.


Video Outputs

Output video signals to Analog and HD simultaneously.
• Composite Output
   for use with analog transmitters.
• HD Output
   use with the latest digital technology.
• Ideal for digital SD recording devices


Control the Boson Remotely

Assign any available parameter on the Boson for ‘on-the-fly’ control.
• Continuous Digital Zoom
• Color Palette Selection
• (FFC)Flat Field Correction
• (DDE)Digital Detail Enhancement
• Wired or Wireless control


INFORMATION
Features

RHP Boson RC-HD-IF Remote Control Pin Out - Click to Enlarge

Click Photo to Enlarge

Specifications
Connections & Communications  
Digital Video Output 1080p60 / 720p60
MAVLink Interface 3.3 Volt (5 Volt Tolerant) UART/TTL Protocol
Remote Control Yes - PWM (5 channels), S-Bus (16 Channels), MAVLink
10 Pin Accessory Port Power Out (5Volts), PWM, S-Bus, MavLink
Micro - HDMI Digital Video Output
Power  
Input Voltage 5-26.0 VDC(14-PIN JST SVR Connector
  5.0 VDC USB-Micro Connector
1

Write a review

Note: HTML is not translated!
Bad Good
Captcha