Menu
Your Cart

FLIR PT-Series Pedestal Mount Assembly

FLIR PT-Series Pedestal Mount Assembly
FLIR PT-Series Pedestal Mount Assembly
FLIR PT-Series Pedestal Mount Assembly
FLIR PT-Series Pedestal Mount Assembly
FLIR PT-Series Pedestal Mount Assembly

Kit Contents:

  • PT-Series pedestal mount 4119497 PT-Series adapter plate 4119468
  • 6 each 1/4-20 FHMS x 3/4” Hex, S.S. 6 each 5/16-18 x 3/4 SHCS, S.S. 
  • 6 each 5/16 split washer 
  • 6 each 5/16 flat washer
  • Two extra pieces of each attaching part

  • Availability: In Stock
  • SKU: 500-1117-00
$463.00

Kit Contents:

  • PT-Series pedestal mount 4119497 PT-Series adapter plate 4119468
  • 6 each 1/4-20 FHMS x 3/4” Hex, S.S. 6 each 5/16-18 x 3/4 SHCS, S.S. 
  • 6 each 5/16 split washer 
  • 6 each 5/16 flat washer
  • Two extra pieces of each attaching part

The FLIR PT-Series pedestal mount (4119497) and adapter plate (4119468) are designed for use with medium- to heavy-duty pan and tilt units and will safely support loads up to 125 pounds (57 kg). The mount is constructed of aluminum and has a gray polyester powder coat finish.

INFORMATION
Specifications
Construction Aluminum
Finish Gray polyester powder coat
Adapter Plate Mounting 4 each: 1/4-20 x 3/4 Hex, flat-head machine screws (supplied)
Camera Mounting 4 each: 5/16-18 mounting bolts, flat washers, and split washers (supplied)
Suggested Mounting Method Secure to solid surface with 8 fasteners (not supplied)(5/16-inch (or M8) diameter recommended)
Maximum Load 125 lb. (57 kg)
Weight 2.9 lb. (1.3 kg)

Write a review

Note: HTML is not translated!
Bad Good
Captcha