Menu
Your Cart

Low Profile BOSON VPC Interface Module with optional EXT. Sync in/out

Low Profile BOSON VPC Interface Module with optional EXT. Sync in/out
Low Profile BOSON VPC Interface Module with optional EXT. Sync in/out
Low Profile BOSON VPC Interface Module with optional EXT. Sync in/out
Low Profile BOSON VPC Interface Module with optional EXT. Sync in/out
Low Profile BOSON VPC Interface Module with optional EXT. Sync in/out
Low Profile BOSON VPC Interface Module with optional EXT. Sync in/out
Low Profile BOSON VPC Interface Module with optional EXT. Sync in/out
Low Profile BOSON VPC Interface Module with optional EXT. Sync in/out
Low Profile BOSON VPC Interface Module with optional EXT. Sync in/out
Low Profile BOSON VPC Interface Module with optional EXT. Sync in/out
Low Profile BOSON VPC Interface Module with optional EXT. Sync in/out
  • VPC - Video, Power & Communication
  • 5 to 26Volts DC Input
  • Reverse Polarity Protected
  • Power via USB
  • Stream Video to PC via USB
  • 2 Composite Video Outputs
  • Ext. Video SYNC In/Out Option
  • Low Profile
  • Works with Boson 320 or 640 Version

  • Availability: In Stock
  • SKU: RHP-BOS-VPC-IF
$129.95

Available Options

When attaching this Interface, please use proper personal grounding (or grounding wrist strap) to prevent static damage to the module.

RHP-BOS-VPC-IF

Video Power Communication Interface




Simple Integration

The Low Profile Boson VPC Interface Module simplifies integration. Two alternate Video & Power connections on the Low Profile Boson VPC Interface Module allows for a variety of installation options.



FLIR Boson GUI Friendly

You can adjust all the parameters available on the FLIR Boson using the FLIR Boson GUI when connected to your PC via the supplied USB cable.



Reverse Polarity Protected

With the intelligent polarity sensing protection, the RHP-BOS-VPC-IF can be powered from the alternate 6-Pin JST ports to USB or a 5-26VDC power source


* Please Note: External Sync is disabled on Boson ≤9Hz Cameras.
The use of external sync on these cameras is not supported because pulses cannot be correlated to a specific output frame because of the way the reduced frame rate video is created. If attempted, the camera will reject commands to begin external sync mode.

This kit includes:

  • 6-PIN JST to USB/RCA Video cable (x1)
  • 6-PIN JST to Bare End Leads (x2)
  • M1.6 Screws (x4)
  • Allen Key (x1)
  • RHP BOS VPC-IF Board (x1)
  • Quick Start Guide (x1)

Power Requirements:  5 Volts DC - 25 Volts DC
Power Dissipated:  Avg. 0.84W - Max. 2W
Dimensions:  21mm x 21mm
Weight:  2.6 grams
Control:  USB 2.0
Video Output:  NTSC 30Hz / PAL 25Hz


OVERVIEW
Weight 2.6g without camera
Dimensions (L x W x H) 21x21x1.6mm(w/o Connector)
21x21x6mm(w/Connector)
CONNECTIONS & COMMUNICATIONS
Connector 2x 6-Pin JST SHR-06V-S-B
GPIO Channels Sync Output Available - Call for details
Mounting Features Four M1.6 Holes
ELECTRICAL & MECHANICAL
Control Channels USB 2.0 (Video + Control)
Video Channels 2 Analog NTSC/PAL Switchable Outputs, USB Digital Video
ENVIRONMENTAL
Operational Altitude 12km (max altitude of a commercial airliner or airborne platform)
Operating Temperature Range -40°C to 80°C
Storage Temperature Range -50°C to 105°C
POWER
Input Voltage 5-26VDC - Reverse Polarity Protected
Power Dissipation <0.1W (Camera Not Included) 3.5W Max With Camera, 6W Total Fused
INFORMATION
What's In The Box

Boson VPC Module What's in the Box


Write a review

Note: HTML is not translated!
Bad Good
Captcha