FLIR FC-332 ID Thermal Security Camera with Analytics

FLIR FC-332-ID Thermal Analytics Camera

FLIR A400 Smart Sensor Now In Stock

FLIR FC-332-ID Thermal Analytics Camera

FLIR FC-332-ID Highlights:

  • Uncooled VOx Microbolometer
  • Frame Rate: NTSC: 30 Hz - PAL: 25 Hz / 8.3 Hz
  • Array: 320 x 240
  • FoV: 32°(H) × 26°(V)
  • 19mm Lens
  • Pixel Pitch: 34µm
  • Focal Length: f/1.0
  • Reliable on-board analytics
  • Best-in-class perimeter protection
  • Integrates with analytics
  • Industry-Leading image quality
  • Expanded selection of high-performance lenses
$5,040.00 See Price In Cart. What's this?
This Thermal Camera is export controlled. More Information


The FLIR FC-332-ID combines best-in-class thermal image detail and high-performance edge perimeter analytics in a single device that delivers optimal intrusion detection in challenging environments and extreme conditions. FC-Series ID cameras feature on-board video analytics optimized for FLIR’s thermal sensors. Easy to set up and capable of classifying human or vehicular intrusions, FC-Series ID cameras provide reliable detection with very few false alarms.rates, all without human intervention.


Accurately classify humans and vehicles

  • Auto calibration for depth setup for a simple and reliable configuration. No additional measurement tools are needed, requiring only a single installer on site
  • Allows analytics in corridor mode, reducing the number of cameras and improving the total cost of ownership
  • Target hand-off to PTZ camera auto-tracking


Crisp, Clean Imagery for Unmatched Video Analytics Performance & Reliability

  • Superior image quality in low-contrast conditions
  • FLIR’s custom AGCs provide images with extremely high contrast
  • Dynamic Detail Enhancement (DDE) creates sharp edges and contrast that improve analytics performance


Wide Range of Lenses for Optimal Detection Ranges in All Conditions

  • Choose lenses from 7.5 mm (90° HFOV) to 75mm (8.2° HVOF), suitable for any perimeter or open area
  • High performance optics deliver clear thermal video
  • High analytic ranges to reduce number of cameras and total cost of ownership (TCO)

FLIR FC-332-ID Camera Specifications


Array Format 320 × 240
Detector Type Long-Life, Uncooled VOx Microbolometer
Spectral Range 7.5 μm to 13.5 μm
Effective Resolution 76800
Pixel Pitch 34 µm
Thermal Frame Rate NTSC: 30 Hz - PAL: 25 Hz / 8.3 Hz
Optical Characteristics ModelFOVF#, Focal Length
FC-332-ID 32° × 26° f/1.0, 19 mm
E-Zoom 4x continuous E-Zoom
Focus Athermalized, Focus-Free
Sensitivity <35mK for F# 1.0 optics


Composite Video (NTSC or PAL) Hybrid system with IP & analog video Dynamic NTSC or PAL settings
Video Compression Two independent channels of H.264 (Restricted VBR and CBR,10kbps-4Mbps, MPEG4, and MJPEG)
Streaming Resolution D1: 720x576, 4CIF: 704x576, Native: 640x512, Q-Native: 320x256, CIF: 352x288, QCIF: 176x144
Control Input/Output 1x Dry Contact in; 1x Relay Out (rated load 0.025A@ 5VDC)
Analog Video Output Composite 1Vp-p (PAL or NTSC), 1 x BNC 75Ω
Thermal AGC Modes Brightness, Contrast, Sharpness, Grey Shade Compression, Gamma, Smart Screen Balance, AGC Types: Histogram, Histogram HC, Histogram Blend, Linear
Thermal AGC Region of Interest (ROI) Default, Presets and User definable to insure optimal image quality on subjects of interest
Analytics Management Web-based configuration and management. Masking of analytic detection areas, adjustable sensitivity, automatic responses, remote I/O control
Analytics Features Region Entrance/Intrusion Detection, Crossover/Fence Trespassing; Auto/Manual Depth Setup, Human and Vehicle Rules, Hand-off target to PTZ racking, Tampering
Image Uniformity Optimization Automatic Flat Field Correction (FFC); Thermal and Temporal Triggers
SD Card Recording¹ Support for 32GB SD Card (not supplied)

System Integration

Ethernet 10/100 Mbps
External Analytics Compatible Yes
Control Input/Output 1x Dry Contact in; 1x Relay Out (rated load 0.025A@ 5VDC)
ONVIF Profile S


Supported Protocols IPV4, HTTP, Bonjour, UPnP, DNS, NTP, RTCP, TCP, UDP, ICMP, IGMP, DHCP, ARP, SCP, FTP, RTP/RTSP, Unicast/Multicast, TCP/IP, HTTP, IEEE 802.1X


Without Sunshield: Lens Weight
7.5mm / 9mm / 13mm / 19mm / 25mm / 35mm:

1.8kg (4 lb.)

2.0kg (4.5 lb.)


2.2kg (4.75 lb.)

With Sunshield: Lens Weight
7.5mm / 9mm / 13mm / 19mm / 25mm / 35mm:

2.2kg (4.75 lb.)

2.4kg (5.25 lb.)


2.5kg (5.5 lb.)

(L, W, H)
Without sunshield: 259 x 114 x 106 mm/10.2” x 4.5” x 4.2”
With sunshield: 282 x 129 x 115 mm/11.1” x 5.1” x 4.5”
Power Consumption Source POE (802.3af) POE+ (802.3at) 12VDC 24VDC 24VAC(VA)
Heater off <5.5W <5.5W <5.5W <5.5W <8W
Heater on (@ 100%) N/A <25W <25W <25W <32W
Surge Immunity on AC Power Lines CE: EN55032 Class A; FCC 47 CFR Part 15, Subpart B, Class A (within CISPR 22:2008 Class A limits)
Surge Immunity on Signal Lines EN 55024: 2010 and 55032: 2010 to 4.0kV on AC aux power lines; EN 50130-4:2011; IEC 62599-2:2010


IP Rating (Dust & Water Ingress) IP66 & IP67
Operating Temperature Range -50°C to 70°C/-58°F to 158°F (Continuous Operation)
-40°C to 70°C /-40°F to 158°F (Cold Start)
Storage Temperature Range -50°C to 85°C/-58°F to 185°F
Humidity 0-95% relative humidity
Shock MIL-STD-810G “Transportation”
Vibe IEC 60068-2-27
De-Icing / Anti-Icing MIL-STD-810 F, Method 521.2 - 6mm ice, 120 minutes with POE+, 4mm ice with POE af FC-610 & FC-608 TBD with Cold Weather kit.

Warranty & Regulatory

Approvals CE: EN55032 Class A; FCC 47 CFR Part 15, Subpart B, Class A (within CISPR 22:2008 Class A limits)
Certifications IEC 60068-2-1:2007; IEC 60068-2-2:2007; ISTA-1A;
Compliance RoHS Directive 2011/65/EU; WEEE 2012/19/EU
Warranty Camera: 3 Years
Sensor: 10 Years
We found other products you might like!