FLIR A615 13.1mm Lens 45° FoV Thermal Imaging Camera

FLIR A615 13.1mm Lens 45° FoV Thermal Imaging Camera

FLIR A615 13.1mm Lens 45° FoV Thermal Imaging Camera

FLIR A615 (50Hz) 13.1mm Lens 45° FoV Thermal Imaging Camera Highlights:
  • IP Thermography Camera
  • 13.1mm Lens
  • 640x480 Resolution
  • 45°(H) x 34°(V) FoV
  • -20°C to +2000°C Object Temp Range
  • GigE Vision™ & GenICam™ Compliant
  • 8 Lens Options
  • GenICam compliant.
  • Trigg/synchronization/GPIO.
  • 16-bit 640 × 480 pixel images at 50 Hz, signal, temperature linear, and radiometric.
  • Windowing mode: 640 × 240 pixels at 100 Hz or 640 × 120 pixels at 200 Hz.
  • Compliant with any software that supports GenICam, including National Instruments IMAQ Vision and Stemmers Common Vision Blox.
  • Open and well-described TCP/IP protocol for control and set-up.
$18,995.00
SKU
55001-0103
FLIR A615 (50Hz) Thermal Imaging Camera 45° Lens Pan Tilt optionalFLIR A615 (50Hz) Thermal Imaging Camera thermal_shots.jpg

FLIR A615 (50Hz) Thermal Imaging Camera 45° Lens

The FLIR A615 is a world class thermal imaging camera. This thermal imaging camera has features and functions that make it the premiere choice for anyone who would like to utilize high resolution thermal imaging to solve problems or for analyzation.

Among its main features are GigE Vision™ and GenICam™ compliance, which makes it plug-and-play ready when used with software packages such as IMAQ Vision and Halcon.

The FLIR A615 (50Hz) Thermal Imaging Camera  is used in several industries where infrared and thermal measurement are required. Automotive car-seat heating, engine manufacturing, food processing, and electronics are just a few of the industries in which the FLIR A-Series A615 is utilized.

 


 

 

FLIR A615 (50Hz) Thermal Imaging Camera in hand

Medical

FLIR A615 (50Hz) Thermal Imaging Camera medical

Infrared thermography is based on analysis of skin surface temperatures as a reflection of normal or abnormal human physiology using a high performance infrared camera.

Safety

FLIR A615 (50Hz) Thermal Imaging Camera safety

In oil/gas production, power generation or distribution there is a need to prevent and detect fires fast and automatically. A fix mounted infrared camera can be installed discretely and almost anywhere to monitor your business.

Education

FLIR A615 (50Hz) Thermal Imaging Camera education

FLIR infrared cameras are being used in university laboratories where high-end academic and applied research is on-going in a wide range of disciplines.

 

Veterinarian

FLIR A615 (50Hz) Thermal Imaging Camera vetrinarian

An animal's body creates heat that fluctuates throughout the body depending on blood flow. The body's recognition of injury and a subsequent increase in blood flow can happen even before the animal shows signs of pain, and other conditions.

Automation

FLIR A615 (50Hz) Thermal Imaging Camera automation

For the automotive industry the ability to continuously and automatically ensure quality is of great importance. A fix mounted infrared camera can be installed almost anywhere to monitor your production process.

Manufacturing

FLIR A615 (50Hz) Thermal Imaging Camera manufacturing

IR cameras made by FLIR have become indispensible tools for many engineering disciplines, particularly in advanced product development.

 

 

Imaging and optical data
IR resolution 640 × 480 pixels
Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK
Field of view (FOV) 45° × 34° (55° diagonal)
Minimum focus distance 0.15 m (0.49 ft.)
Focal length 13.1 mm (0.52 in.)
Spatial resolution (IFOV) 1.23 mrad
Lens identification Automatic
F-number 1.0
Image frequency 50 Hz (100/200 Hz with windowing)
Focus Automatic or manual (built in motor)
Detector data  
Detector type Focal plane array (FPA), uncooled microbolometer
Spectral range 7.5–14 µm
Detector pitch 17µm
Detector time constant Typical 8 ms
Measurement  
Object temperature range
  • –40°C to +150°C (–40°F to +302°F)
  • 100 to +650°C (+212 to +1202°F)
  • 300 to +2000°C (+572 to +3632°F)
Accuracy ±2°C (±3.6°F) or ±2% of reading
Measurement analysis  
Atmospheric transmission correction Automatic, based on inputs for distance, atmospheric temperature and relative humidity
Optics transmission correction Automatic, based on signals from internal sensors
Emissivity correction Variable from 0.01 to 1.0
Reflected apparent temperature correction Automatic, based on input of reflected temperature
External optics/windows correction Automatic, based on input of optics/window transmission and temperature
Measurement corrections Global object parameters
USB  
USB Control and image
USB Standard USB 2 HS
USB, connector type USB Mini-B
USB, communication TCP/IP socket-based FLIR proprietary
USB Streaming

16-bit 640 × 480 pixels @ 25 Hz

            • Signal linear
            • Temperature linear
            • Radiometric
USB, protocols TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp,
SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP
Ethernet  
Ethernet Control and image
Ethernet, type Gigabit Ethernet
Ethernet, standard IEEE 802.3
Ethernet, connector type RJ-45
Ethernet, communication TCP/IP socket-based FLIR proprietary and GenICam protocol
Ethernet, image streaming

16-bit 640 × 480 pixels @ 50 Hz

16-bit 640 × 240 pixels @ 100 Hz

16-bit 640 × 120 pixels @ 200 Hz

        • Signal linear
        • Temperature linear
        • Radiometric

          GigE Vision and GenICam compatible

Ethernet, protocols TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp,
SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP
Digital input/output  
Digital input, purpose Image tag (start, stop, general), Image flow control, (stream on/off), Input ext. device (programmatically read)
Digital input 2 opto-isolated, 0–1.5 V = low, 3–25 V = high
Digital output, purpose Output to ext. device (programmatically set)
Digital output 2 opto-isolated, ON = supply (max. 100 mA), OFF = open
Digital I/O, isolation voltage 500 VRMS
Digital I/O, supply voltage 6–24 VDC, max. 200 mA
Digital I/O, connector type 6-pole jackable screw terminal
Power system  
External power operation 12/24 VDC, 24 W absolute max.
External power, connector type 2-pole jackable screw terminal
Voltage Allowed range 10–30 VDC
Environmental data  
Operating temperature range –15°C to +50°C (+5°F to +122°F)
Storage temperature range –40°C to +70°C (–40°F to +158°F)
Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C to +40°C (+77°F to +104°F)
EMC
  • EN 61000-6-2:2001 (Immunity)
  • EN 61000-6-3:2001 (Emission)
  • FCC 47 CFR Part 15 Class B (Emission)
Encapsulation IP 30 (IEC 60529)
Shock 25 g (IEC 60068-2-27)
Vibration 2 g (IEC 60068-2-6)
Physical data  
Weight 0.94 kg (2.07 lb.)
Camera size (L × W × H) 225× 73 × 75 mm (8.8 × 2.9 × 3.0 in.)
Camera size, excl. lens (L × W × H) 203 × 73 × 75 mm (8.0 × 2.9 × 3.0 in.)
Tripod mounting UNC ¼"-20 (on three sides)
Base mounting 2 × M4 thread mounting holes (on three sides)
Housing material Aluminum
What's in the Box  
List of contents
            • Infrared camera with lens
            • Ethernet cable
            • Mains cable
            • Power cable, pig-tailed
            • Power supply
            • Printed documentation
            • USB Cable
            • Utility CD-ROM

FLIR A600 Series Thermal Camera What's in the Box

Click Photo to Enlarge