Menu
Your Cart

DMM 37CX290-ML FPD-Link III monochrome board camera

DMM 37CX290-ML FPD-Link III monochrome board camera
DMM 37CX290-ML FPD-Link III monochrome board camera
Highlights:
  • 1/2.8 inch Sony CMOS STARVIS sensor (IMX290)
  • 1,920×1,080 (2.1 MP), up to 60 fps
  • Rolling shutter
  • Linux software included

  • SKU: DMM 37CX290-ML
$0.00

DMM 37CX290-ML

FPD-Link III monochrome board camera

The Imaging Source DMM 37CX290-ML MIPI CSI-2 camera with FPD-Link III serializer boards offer nearly the same feature set as MIPI CSI-2 cameras, but allow cable lengths up to 15m. Image data, commands and power supply are transmitted via a thin coaxial cable. The FPD-Link board cameras can be used with NVIDIA Jetson Nano, NVIDIA Jetson AGX Xavier as well as Raspberry Pi 4 and feature the latest Sony and ONSemi CMOS sensors (rolling or global shutter).

The board cameras are suitable for single or multi-camera embedded systems for automotive, IoT and standard machine vision applications.

GENERAL BEHAVIOR
Dynamic Range 12 bit
Resolution 1,920×1,080 (2.1 MP)
Frame Rate 60 fps
Video Output Format RAW10, RAW12
INTERFACE (OPTICAL)
IR cut filter No
Sensor Type CMOS
Sensor Specification IMX290
Shutter rolling
Format 1/2.8 inch
Pixel Size H: 2.9 µm, V: 2.9 µm
Lens Mount M12x0.5
INTERFACE (ELECTRICAL)
Interface FPD-Link III
Auto iris control No
Trigger No
I/Os No
INTERFACE (MECHANICAL)
Dimensions (H x W x L) H: 30 mm, W: 30 mm, L: 27.5 mm
Mass 7 g
Shutter 15 µs to 1/120 s
ENVIRONMENTAL
Temperature (Operating) -5 °C to 45 °C
Temperature (Storage) -20 °C to 60 °C
Humidity (operating) 20 % to 80 % (non-condensing
Humidity (storage) 20 % to 95 % (non-condensing)
RECOMMENDED
Required Accessories Lens, Cable

Write a review

Note: HTML is not translated!
Bad Good
Captcha