Menu
Your Cart

DFM 22BUC03-ML USB 2.0 color board camera

DFM 22BUC03-ML USB 2.0 color board camera
DFM 22BUC03-ML USB 2.0 color board camera
DFM 22BUC03-ML USB 2.0 color board camera
DFM 22BUC03-ML USB 2.0 color board camera
DFM 22BUC03-ML USB 2.0 color board camera
DFM 22BUC03-ML USB 2.0 color board camera
DFM 22BUC03-ML USB 2.0 color board camera
Highlights:
  • 1/3 inch Micron CMOS sensor (MT9V024)
  • 744×480 (0.4 MP), up to 76 fps
  • Global shutter
  • Trigger and I/O inputs

  • SKU: DFM 22BUC03-ML
$129.00

Available Options

DFM 22BUC03-ML

USB 2.0 color board camera

The DFM 22BUC03-ML camera is a high quality USB 2.0 CMOS Color Board Camera with Trigger at an unbelievably low cost. With resolutions from 320x240 to 744x480, this board camera can provide great detail in every image with its Progressive Scan CMOS CCD image sensor. Frame rates can reach up to 200 frames per second at 320x240 and up to 60 frames per second at the highest resolution of 744x480.

With an amazingly compact 36(H) x 36(W) x 25(L)mm form factor, this cost effective USB board camera is one of the best cameras you will find. Drivers and Software are included with this camera. Please note, lens is not included.

Please note:

  • Lens Mount and Lens Not Included
  • This camera is also on a 2-4 week lead time on all new orders

System Requirements

  • Pentium III/800 MHz, 128 MB of Ram
  • Graphics Card with 24/32 bit Color
  • Windows XP, Vista (32 & 64 bit) or Windows 7 (32 & 64 bit)
  • DirectX 9.0c or Higher

 

Resolution Format Frames Per 
Second (FPS)
Sensitivity
320x240 (RGB32/Y800) 1/3" 200 4.8 V/lux-sec
640x480 (RGB32/Y800) 1/3" 90 4.8 V/lux-sec
744x480 (RGB32/Y800) 1/3" 60 4.8 V/lux-sec
* Configurable with the shipped software

 

GENERAL BEHAVIOR
Dynamic Range 8 bit
Video formats @ frame rate (maximum) 744×480 (0.4 MP) Y800 @ 76 fps
744×480 (0.4 MP) RGB32 @ 76 fps
INTERFACE (OPTICAL)
IR cut filter No
Sensor Type CMOS
Sensor Specification Aptina MT9V024
Shutter global
Format 1/3 inch
Pixel Size H: 6 µm, V: 6 µm
Lens Mount M12x0.5
INTERFACE (ELECTRICAL)
Interface USB 2.0 (forwards compatible)
Supply voltage 4.5 VDC to 5.5 VDC
Current consumption approx 250 mA @ 5 VDC
Auto iris control No
Trigger Yes
I/Os Yes
INTERFACE (MECHANICAL)
Dimensions (H x W x L) H: 30 mm, W: 30 mm, L: 15 mm
Mass 7 g
ADJUSTMENTS
Shutter 1/10,000 s to 1/4 s
White Balance -6 dB to 6 dB
ENVIRONMENTAL
Temperature (Operating) -5 °C to 45 °C
Temperature (Storage) -20 °C to 60 °C
Humidity (operating) 20 % to 80 % (non-condensing)
Humidity (storage) 20 % to 95 % (non-condensing)
RECOMMENDED
Required Accessories Lens, Cable

Write a review

Note: HTML is not translated!
Bad Good
Captcha