Add-Ons & Components

Cable to synchronize two cameras,‎ M12 connectors in both ends. Physical data   Cable length 2 m (6.6 ft.)‎ Connector M12 to M12 Color Black Shipping information   Packaging,‎ type Cardboard box List of contents Cable Packaging,‎ weight 252 g (8.9 oz.)‎ Packaging,‎ size ..

This cable is used to connect the infrared camera to Ethernet. Physical data Weight 80 g (2.8 oz.)‎ Cable length 2.0 m (6.6 ft.)‎ Connector RJ-45 to RJ-45 Cable type CAT-6 Shipping information Packaging,‎ type Cardboard box Packaging,‎ weight 130 g (4.6 oz.)‎ Packaging,‎ size 202 × 146 × 25 mm (8.0 × 5.7 × 1.0 in.)‎ EAN-13 7332558006320 UPC-12 84518800..

FC Series Wall mount 4129742 The FC-Series cameras are an infrared thermal imaging camera intended for outdoor security applications, and can be installed in a fixed location or on a pan/tilt mechanism. The FC-Series cameras are intended to be mounted on a medium-duty fixed wall mount commonly used in the security industry. This camera mount supports up to 5.4 lbs (2.5 kg). Cables may exit from the back of the camera housing through the supplied cable gland or from the bottom of the camera ..

Corner Mount For use with: TRITON™ F-SERIES ID ELARA™ FC-SERIES O ELARA™ FC-Series R ELARA™ FC-SERIES ID F-/FC Series Corner Mount Part Number 500-1119-00 For use with: TRITON™ F-SERIES ID ELARA™ FC-SERIES O ELARA™ FC-Series R ELARA™ FC-SERIES ID..

FLIR FC Series POE + Supply IEEE 802.3AT 4210755 The FC-Series ID camera can be powered using Power over Ethernet Plus (PoE+) or with a conventional 24 Vac or 24 Vdc powersupply. For a PoE+ connection, PoE+ power supply (PN 4132391, also called a PoE+ injector) is available if the camera is not connected to a PoE+ switch. The maximum Ethernet cable run is 100 meters including the PoE+ power supply. In installations using PoE+ power and IP video, only a single Ethernet cable from the camera is ..

FC Series Pole adapterFLIR FC Series Pole Adapter 4132982 The FC-Series Wall Mount  can be fixed to a Pole with this Pole Mount Accessory.  If the camera is mounted on a pole, an Ethernet cable should run at least to the bottom of the pole, so a laptop could be temporarily connected directly to the camera. ..

Pole Junction Box Pole Junction Box for FB-Series Thermal Security Cameras. Allows the FLIR FB Series O and FB Series ID cameras to be mounted on a Pole..

Wall Junction BoxWall Junction Box for FB-Series Allows the FLIR FB Series O and FB Series ID cameras to be mounted on a Wall..

The FLIR VUE Series Voltage Regulator is an interface for the camera to provide power and obtain video. The Voltage Regulator allows you to connect to virtually any sUAS battery source to provide the constant 5 Volts DC needed to operate the FLIR VUE PRO and FLIR VUE cameras...

Controlling your thermal core is easy Control the FLIR TAU2 and VUE remotely with our RC Interface.     Assign virtually any feature to the RC controller and change all camera options ‘on-the-fly’   Continuous Digital Zoom Color Palette Selection FFC (NUC) Shutter Control Spot Meter / Temp Reading (DDE) Digital Detail Enhancement Thermal AGC Contrast & Brightness Capture Images to TAU2’s Memory 7 to 32 Volts DC Input Reverse Polarity Prot..

10-pin mini-USB connector Accepts a wide input power range Reverse polarity protection Outputs HDMI Video for down-link systems 15 Grams This product is only compatible with the DJI Lightbridge and 3DR Solo systems.The Power/Video Module makes the Vue Pro and Vue Pro R easier to integrate than ever. Its 10-pin mini-USB connector accepts a wide input power range and provides reverse polarity protection while still providing analog video output and access to the camera’s on-board storage...

USB2.0 Cable - USB2-A-B-3 - 3Ft Type A to Mini B..

USB2.0 Cable - USB2-A-B-6 - 6Ft Type A to Mini B..

Glass Filled ABS Top-Down Riser Kit for M-Series (Includes Top Down riser, deck seal gasket, fastener kit)..

Includes Joystick Control Unit (JCU3), power cable, network cable and mounting hardware.FLIR JCU III The Joystick Control Unit (JCU III) is the primary method of controlling the M100/M200 cameras.  Use it to: Power-on/power-off Pan and tilt (tilt only for M100–Series) Zoom Home position Capture and save the camera image Surveillance mode Color palette Scene presets Reverse polarity The JCU-3 can be mounted to a dash or other surface in any orientation...

Includes Joystick Control Unit (JCU2) and mounting hardware. This unit requires PoEFLIR JCU II The Joystick Control Unit (JCU II) is the primary method of controlling FLIR Marine cameras. Use it to: move the camera zoom the camera switch between infrared and visible-light cameras adjust image settings access the on-screen menus Multiple Cameras and/or JCU IIs on a single network You can configure your system with multiple cameras and multiple JCU IIs on the same network. More th..