EYAS Dual Sensor
Dual Sensor - Thermal and Visible Agronomic Camera Set
The new EYAS is a dual sensor thermal and visible light imager designed for use by agriculture managers.
Featuring a cutting edge radiometric sensor, the EYAS pairs a 160 x 120 pixel thermal sensor image with a progressive scan 2MP color camera.
Find Invisible Problems Faster
The images are uploaded on intervals to a remote server. Each image is autonomously ana..
Video Power Communication Interface
The Low Profile Boson VPC Interface Module simplifies integration. Two alternate Video & Power connections on the Low Profile Boson VPC Interface Module allows for a variety of installation options.
FLIR Boson GUI Friendly
You can adjust all the parameters available on the FLIR Boson using the FLIR Boson GUI when connected to your PC via the supplied USB cable.
RC-IF Remote Control Interface for the FLIR Boson
Control the FLIR BOSON remotely with the "RC-IF" Remote Control Interface.
Two Composite Video Outputs allow connections to separate video devices, with no signal loss.
Integrating the Boson Thermal Camera into your UAS has never been easier.
Control the Boson Camera Remotely
The RHP-BOS-RC-IF allows you to control the Boson camera remotely using a 16 Channel S-Bus Signal or up t..
Video Power Communication (VPC) Transistor-Transistor Logic Interface Module
With the intelligent polarity sensing protection, power can be provided via the USB connection or DC Voltage using the provided 6-Pin Video/Power cable or the 7-Pin Pico Blade cable.
3 Video Output Options
Video can be viewed through either the supplied JST to USB/Video cable, JST to Bare End Lead cable or 7-Pin Pico Blade to B..
Integrate the FLIR Boson into your UAS.
The RHP-BOS-RC-HD-IF allows you to control the Boson camera remotely using a 16 Channel S-Bus Signal or up to 5 PWM Signals from your wireless Joystick Remote Control System. Now you can assign any available parameter on the Boson to any knob, switch or lever on your Joystick Remote Controller and adjust these camera parameters ‘on-the-fly’.
With the HD Video output, video signal can be transmitted securely through a..
Boson Tau Replicator Interface
The replicator board adapts the Tau 2 interfaces electronically to make them compatible to the FLIR Boson Camera. By adapting the Boson's native 80-pin Hirose connector to the 50-pin TAU 2 connector used on FLIR's Tau 2 camera accessories, it makes the FLIR Boson camera electrically pin-compatible to the same connection as the TAU 2 providing an easy way to integrate the Boson to an existing installation.