By clicking on or navigating the site, you agree to allow us to collect information on and off this site through cookies. Learn more.
Videology 25B1.2XU3
Product Highlights:
- USB3 AND Digital 10 bit parallel (BT1120) outputs concurrently or individually
- Global Shutter mitigates loss of information or "blur" due to motion in scene
- Binning/ Skipping/ Region of Interest
- 1.2MP Square Pixels / Progressive Scan
- 1280 x 960 recording pixels
- Near IR Sensitivity to 1.1 Micron
- Industrial Grade Sensor assures Long Life & Reliability
$349.00
SKU
Videology 25B1.2XU3
The Videology 25B1.2XU3 provides USB3 AND Digital 10 bit parallel (BT1120) outputs concurrently or individually
- Global Shutter mitigates loss of information or “blur” due to motion in scene
- Binning/Skipping/ Region of Interest
- 1.2MP Square Pixels / Progressive Scan
- Near IR Sensitivity to 1.1 Micron
- Industrial Grade Sensor assures Long Life & Reliability
| Image Sensor | CMOS 1/3" 1.2MP |
| Recording Pixels | 1280 x 960 |
| Pixel / Image Size | 3.75μm |
| Scanning System | Progressive |
| Shutter Type | Global Shutter, automatic / fixed |
| Resolution / Frame Rate | 1.2MP (1280x960) 54/50/30/25 fps 720P (1280x720) 72/60/50/30/25 fps VGA (640x480) 106/100/60/50/30/25 fps |
| Pixel Clock Rate | 74.25MHz |
| Sensitivity | < 0.1 Lux |
| Signal to Noise Ratio | 40.7dB |
| Gain | Fixed / auto |
| BLC | On / Off weighted regions |
| Gamma | Range from 0.45 - 1.00 |
| Edge Enhancement | On / Off |
| Synchronization | Internal |
| Mirror/Flip | Horizontal & Vertical On/Off |
| Video Output | Digital: Y/out (10-bits @ 74.25MHz) USB3.0 output: 8 bits |
| Supplied Voltage | +4.5 – 5.5V |
| Current Drawn | 305mA (@5V) |
| Power Consumption | 1.53W (max 1.75W) |
| Communication | I²C |
| Dynamic Range | 71.1dB linear |
| Environmental | |
|---|---|
| Operating Temperature | -15°C ~ 60°C (5°F ~ 131°F) |
| Operating Humidity | 20% up to 93%RH |
| Storage Temperature | -40°C ~ + 80°C (-40°F ~ 176°F) |
| Storage Humidity | 30% - 90% |
| Lifetime MTBF | >150,000 hrs |
| Packaging | ESD safe package |
| Mechanical | |
| Dimensions WxHxD | 32mm x 32mm x 20mm (1.26" x 1.26" x 0.8") (without lens mount) |
| Weight | Weight 40g (1.4oz) |
| Lens Mounts | Replace "X" in model number with desired lens mount option: |
| Example: To select an M-12 Board Mount Change 25B1.2XU3 to 25B1.25U3 | |
| 2 = M-12 pinhole mount 5 = M-12 board mount 8 = CS mount |
|
| Connectors | J100 - JST-BM10B-SRSS-TB GPIO/ Power (10pin) J102- Molex-501920-3001 Digital Video Output (30pin) USB - USB 3.0 Micro-B |
