Videology 20B14X - 1/4” CMOS Color Board Camera

Videology 20B14X - 1/4” CMOS Color Board Camera



DFM 27UP006-ML Color Board Camera

DFM 27UP006-ML Color Board Camera

Videology 20B14X - 1/4” CMOS Color Board Camera

Product Highlights
  • Color Board Camera (NTSC)
  • 1/4" CMOS
  • 640x480 Resolution
  • Up to 30fps
  • Complete SDK available


• 22mm x 26mm mini-board is compatible with previous 20K family products

• Delivers 8-Bit DIGITAL YUV & composite video outputs simultaneously

• I2C software controllable features and functions

• Up to 4 overlay images can be stored to SPI FLASH

• White balance: AWB and push set

• Mirror and flip mode option

• Lens mount: metal CS, M12 board or pinhole

• Optional USB model

Subject to change
Image Sensor 1/4" CMOS
Resolution 640 x 480
Frame Rate 30fps (NTSC) 25fps (PAL)
Sensitivity < 0.05 lux, (50 IRE) F1.2, 3200°K, lens transmission 80%, scene reflection 75%
Signal to Noise Ratio > 46 dB digital output
Gamma 0.45 default
Gain Control Automatic 36 dB (AGC default) or Fixed options via software
Scan Mode Interlaced
Mirror Mode Selectable via software
Synchronization Internal
Back Light Compensation Default off (selectable via software)
White Balance Mode AWB (fixed modes selectable via software)
Contour Enhancement Default on
Iris Control Electronic Rolling Shutter
Shutter Speed Automatic from 1/60 to 1/100,000 (NTSC)
Automatic from 1/50 to 1/100,000 (PAL)
Video Outputs

8-bit digital YUV 4:2:2 @ CCIR656


Control Communication I²C control
Power supply 4.5-12VDC +/- 5% (not polarity protected)
Power consumption < 0.8W
Operating Temperature -40°C ~ 50°C (-40°F ~ 122°F)
Operating Humidity 20 up to 93%RH
Storage Temperature -40°C ~ 90°C ( -40°F ~ 194°F)
Storage Humidity Up to 98%RH
Lifetime MTBF > 150,000 hrs
Packaging ESD safe package
Dimensions WxHxD 22mm x 26mm x 11mm without lens (1" x 0.87" x 0.43")
Weight 6.4g (0.23oz)
Lens mounts Replace "X" in model number with desired lens mount option:
Example: To select an M-12 Board Mount Change 20B14XDIG to 20B145DIG
2 = M-12 pinhole mount
5 = M-12 board mount
8 = CS mount


Remove analog connector J102 in order to mate directly to Videology USB board

1102 Power/ analog video/ 6pin mount I²C connector
Vertical JST: BM06B-SRSS
1100 Power/ video/ digital YUV, all in a 30 pole board to board connector
MOLEX-501920-3001 Board to Board connector (J102)
MOLEX-52991-0308 Mating part, must be used on the application side