This 35X zoom camera is the latest addition to our line up of OEM products, and a compact chassis camera design for surveillance of various applications under a wide range of light conditions. High-contrast conditions can be viewed without glare or loss of detail thanks to the wide dynamic range design. The wide-dynamic range, the high-sensitivity, and the 35X zoom, make this is ideal for industrial applications.

• 35X Optical Zoom to 1.7° HFOV
• 12X Digital Zoom
• ¼ Solid State CCD
• Optical Field-of-View: H : 55.8°(wide), 1.7°(tele)
• > 520 TV Lines
• 752(H) x 582(W) Pixels
• Composite & S-Video Out
• NTSC & PAL Available
• 9 to 12 Volts DC
• Weight: Approx. 240g
• Progressive Recording Direct to HDD
• High Sensitivity F1.4 lens, 0.5 lux interlaced
• Wide-Dynamic Range (WDR)
• Day/Night Switching
• The 35X and the 10X zoom blocks require an interface board and software to operate. See the RHP-OEMPCB-01-KIT for this solution.
• Included with each camera is a 114mm 9 Conductor Flexible Flat Cable 1.0 mm pitch (P/N: FFC-9-1-114mm)
   
• Sold Separately:
  140mm 9 Conductor Flexible Flat Cable 1.0 mm pitch (P/N: FFC-9-1-140mm)
  200mm 9 Conductor Flexible Flat Cable 1.0 mm pitch (P/N: FFC-9-1-200mm)
  
  PCB Mount connectors available at DigiKey:
  Horizontal Mount w/Flip-Lock: HFB109CT-ND
  Vertical Surface Mount: 455-1928-1-ND

Zoom Ratio

With the powerful 35X optical zoom lens, a user can monitor a scene from any angle. Combined with the 12X digital zoom, the zoom ratio is x000.

Recording Direct

Record high quality video directly to your hard drive. No more grainy images and lines with progressive recording. This new function allows clearer and better quality video.

Image Stabilization

The EIS (Electronic Image Stabilization) function allows for a clean video viewing experience. Automatically eliminates blurry and jumpy images. This 35X zoom can be mounted in a vehicle to give crisp, easy-to view images.

Wide Dynamic Range

The wide dynamic range technology uses two shutter speeds in alternative video fields and combines two fields into one progressive scan frame. The highly sensitive F1.4 lens allows detailed capture of images even in a mixture of over-bright and dark scenes.

Progressive Recording:

What is required for progressive recording direct to the HDD? The progressive scan CCD on the RHP-35X-OEM has a function called Frame Output. With the Frame Output function (only available in progressive processing mode) the camera will output the 2 interlaced output fields from the same CCD "frame" (i.e. readout). If the camera output is fed to a frame-mode DVR/NVR or Video Capture card, the sequence of recorded frames will have no interlace artifacts of motion displacement if the scene had motion in it.

The down side is that you are only seeing every other CCD output so the image in live mode looks choppy. However, the benefit is that the recorded frames have no litter and will also have twice the vertical resolution. It is crucial that the field order (odd/even vs even/odd) of the camera be matched to the DVR/NVR or capture card or else the motion jitter will be twice as bad. The output field order in our cameras is programmable via software commands. This Frame Output mode is only meant for the above, not for normal live CCTV viewing.

OEM Interface Board

OEMCameras.com is featuring a NEW interface board (RHP-OEMPCB-01-KIT) to control the new 35X and the 10X Optical Zoom Block Cameras!

RHP-OEMPCB-01-KIT

This board provides a (DB9) serial cable connection to your PC for software control, 12V DC power input, Composite Video Output, and a flat ribbon cable connector to your camera (Ribbon cable only included with 10X or 35X zoom camera).

Contents of the RHP-OEMPCB-01-KIT

• 1) 25mm x 27mm PCB Board
• 1) 6 Pin Bare Wire Harness for Power/Video/Sync Inputs (150mm)
• 1) 3 Pin Bare Wire Harness for RS-232 Communication (125mm)
• 1) 9 Conductor Flat Flex Cable (50mm)
• Datasheet

Software

PC Software to communicate with both the 35X and 10X zoom cameras is only available for download.

RHP-OEMIO-01-KIT

This board allows ease of use for power, video, and RS-232 communication. This board converts 9 Pin (50mm) flat flex cable to Bare wire video transmission for ease of integration. 9-12V DC power input, and Composite Video Output. S-Video option available via 4 pin connector

Contents of the RHP-OEMIO-01-KIT

• 1- 25mm x 27mm PCB Board
• 1- 6 Wire Harness for Video Transmission
• 1- 3 Wire Harness for RS-232 Communication
• 1- 9 Pin Flat Flex Cable
• Instructions