- UAV & Drone Components
Analog Digital Board Cameras
- Add-ons & Components
- Pan Tilt Systems
The FLIR A315 18mm thermal imaging camera offers an affordable and accurate temperature measurement for a variety of applications where network capabilities and compliance with network protocols are of importance. The FLIR A315 18mm thermal imaging camera comes with a 18mm standard lens providing a 25°×19° field of view and 320×240 resolution.
The FLIR A315 18mm features GigE Vision and GenICam compliance, which makes it plug-and-play ready when used with software packages such as IMAQ Vision and Halcon.
The FLIR A315 18mm is used in several industries where infrared and thermal measurement are required. Automotive car-seat heating, engine manufacturing, food processing, and electronics are just a f allowfullscreenew of the industries in which the FLIR A315 18mm is utilized.
Infrared thermography is based on analysis of skin surface temperatures as a reflection of normal or abnormal human physiology using a high performance infrared camera.
In oil/gas production, power generation or distribution there is a need to prevent and detect fires fast and automatically. A fix mounted infrared camera can be installed discretely and almost anywhere to monitor your business.
FLIR infrared cameras are being used in university laboratories where high-end academic and applied research is on-going in a wide range of disciplines.
An animal's body creates heat that fluctuates throughout the body depending on blood flow. The body's recognition of injury and a subsequent increase in blood flow can happen even before the animal shows signs of pain, and other conditions.
For the automotive industry the ability to continuously and automatically ensure quality is of great importance. A fix mounted infrared camera can be installed almost anywhere to monitor your production process.
IR cameras made by FLIR have become indispensible tools for many engineering disciplines, particularly in advanced product development.
|Imaging and optical data|
|IR resolution||320 × 240 pixels|
|Thermal sensitivity/NETD||< 0.05°C @ +30°C (+86°F) / 50 mK|
|Field of view (FOV)||25° × 18.8°|
|Minimum focus distance||0.4 m (1.31 ft.)|
|Focal length||18 mm (0.7 in.)|
|Spatial resolution (IFOV)||1.36 mrad|
|Image frequency||60 Hz|
|Focus||Automatic or manual (built in motor)|
|Detector type||Focal plane array (FPA), uncooled microbolometer|
|Spectral range||7.5–13 µm|
|Detector pitch||25 µm|
|Detector time constant||Typical 12 ms|
|Object temperature range||
|Accuracy||±2°C (±3.6°F) or ±2% of reading|
|Atmospheric transmission correction||Automatic, based on inputs for distance, atmospheric temperature and relative humidity|
|Optics transmission correction||Automatic, based on signals from internal sensors|
|Emissivity correction||Variable from 0.01 to 1.0|
|Reflected apparent temperature correction||Automatic, based on input of reflected temperature|
|External optics/windows correction||Automatic, based on input of optics/window transmission and temperature|
|Measurement corrections||Global object parameters|
|Ethernet||Control and image|
|Ethernet, type||Gigabit Ethernet|
|Ethernet, standard||IEEE 802.3|
|Ethernet, connector type||RJ-45|
|Ethernet, communication||TCP/IP socket-based FLIR proprietary and GenICam protocol|
|Ethernet, image streaming||16-bit 320 × 240 pixels @ 60 Hz
GigE Vision and GenICam compatible
|Ethernet, protocols||TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP|
|Digital input, purpose||Image tag (start, stop, general), Image flow control, (stream on/off), Input ext. device (programmatically read)|
|Digital input||2 opto-isolated, 0–1.5 V = low, 3–25 V = high|
|Digital output, purpose||Output to ext. device (programmatically set)|
|Digital output||2 opto-isolated, ON = supply (max. 100 mA), OFF = open|
|Digital I/O, isolation voltage||500 VRMS|
|Digital I/O, supply voltage||6–24 VDC, max. 200 mA|
|Digital I/O, connector type||6-pole jackable screw terminal|
|External power operation||12/24 VDC, 24 W absolute max.|
|External power, connector type||2-pole jackable screw terminal|
|Voltage||Allowed range 10–30 VDC|
|Operating temperature range||–15°C to +50°C (+5°F to +122°F)|
|Storage temperature range||–40°C to +70°C (–40°F to +158°F)|
|Humidity (operating and storage)||IEC 60068-2-30/24 h 95% relative humidity +25°C to +40°C (+77°F to +104°F)|
|Encapsulation||IP 40 (IEC 60529)|
|Shock||25 g (IEC 60068-2-27)|
|Vibration||2 g (IEC 60068-2-6)|
|Weight||0.7 kg (1.54 lb.)|
|Camera size (L × W × H)||170 × 70 × 70 mm (6.7 × 2.8 × 2.8 in.)|
|Tripod mounting||UNC ¼"-20 (on three sides)|
|Base mounting||2 × M4 thread mounting holes (on three sides)|
|What's in the Box|
|List of contents||